Carli Update

[justinbeez]

Here's an email sent to me today 6-8-20 from their sales department:

Hey Justin,

It is likely a few months out still. From what I was told, Carli is in the process of having Fox set up the proprietary part number shocks to their specs for these kits, which is running slightly slower than usual due to Fox just now getting back up to speed after a partial closure over the past few months.

Late summer would be a likely estimate to either have these parts released or at least in full production. We are expecting about 2.5” of lift. On the older 1500 trucks, Carli designed the rear springs to retain about 85% weight capacity. In many cases, this should be more than sufficient unless you’re towing extremely heavily.

Thanks,

 

[recon15]

I wander if Carli will be doing a full lift or just the commuter leveling kit. I emailed them and asked about air suspension trucks but no response.

 

[justinbeez]

If by full lift, you mean kings. I thought I saw on the forums they might have those in the works too. But they don't do full lifts (such as bds) unless you're going custom long travel or something directly through them. They try to stay within limits of other stock components with their full kits. They did state the fox's will hopefully provided at least 2.5" of lift from stock in the email though.