Cammed 2019 5.7 Blown Transmission.

[It was worth it]

Alright so I decided to F around and throw a cam in the 5.7, I was romping on the gas and my transmission made a patriotic eagle screech. Looks like were building the trans... does anyone know the stock HP rating on the 8 speed? And torque converter stall limit suggestions would be appreciated. Duration is 220/230 and .595 lift of cam. Any advice is appreciated. Will keep updating as the journey continues. The cam sounds incredible. The power feels even better. Can't wait to build this trans.

 

[1BADRAMLIMITED]

Alright so I decided to F around and throw a cam in the 5.7, I was romping on the gas and my transmission made a patriotic eagle screech. Looks like were building the trans... does anyone know the stock HP rating on the 8 speed? And torque converter stall limit suggestions would be appreciated. Duration is 220/230 and .595 lift of cam. Any advice is appreciated. Will keep updating as the journey continues. The cam sounds incredible. The power feels even better. Can't wait to build this trans.

Any videos of the cam? What cam did you use?

 

[Ellisstrong]

Your truck is only cammed and it blew the transmission?

 

[It was worth it]

Your truck is only cammed and it blew the transmission?

Yeah cam, lifters, valve springs. High volume oil pump. Hardened push rods. Plus tune. These transmissions are POS. Rebuild cost 7701$ getting built for 750HP

 

[It was worth it]

Any videos of the cam? What cam did you use?

I went with comp cams HRT stage 2 cam. It feels amazing power wise all the way through. Here's a video of the cold start pre the final tune

 

[1BADRAMLIMITED]

I went with comp cams HRT stage 2 cam. It feels amazing power wise all the way through. Here's a video of the cold start pre the final tune

I don’t see a video?

Any supporting mods or just the cam?

 

[Ellisstrong]

I’ve heard these transmissions can handle a pretty decent power increase that’s why I’m shocked yours happened with just engine work and no forced induction.

 

[It was worth it]

Supporting mods such as intake or exhaust? I have a cat back exhaust, but no long tubes yet. Was done before the cam. The duration on the cam is 220/230. lift is .588". Transmission is currently being built for 750hp with heavy duty clutches, new gear set and valve body. Also got a custom tune at tuners Inc. Cold air intake as well but that's not even a mod.

 

[Punderwo]

Yeah cam, lifters, valve springs. High volume oil pump. Hardened push rods. Plus tune. These transmissions are POS. Rebuild cost 7701$ getting built for 750HP

Too much for 750hp capable. Contact Paramount Performance or Southern Hotrod. They build these and have been in the Gen 3 hemi performance industry since 2007 or so.

 

[Punderwo]

SHR WAR VIKING 8HP95 RAM TRX

southernhotrod.com

 

[Eaglehemi345]

Alright so I decided to F around and throw a cam in the 5.7, I was romping on the gas and my transmission made a patriotic eagle screech. Looks like were building the trans... does anyone know the stock HP rating on the 8 speed? And torque converter stall limit suggestions would be appreciated. Duration is 220/230 and .595 lift of cam. Any advice is appreciated. Will keep updating as the journey continues. The cam sounds incredible. The power feels even better. Can't wait to build this trans.

How much power you were making at the crank roughly? Because 8HP75 is rated to 510hp and 520tq at the input shaft.

 

[v8440]

Alright so I decided to F around and throw a cam in the 5.7, I was romping on the gas and my transmission made a patriotic eagle screech.

"Patriotic eagle screech" Sorry, I'm not laughing at what happened with your truck, it's your description that's hilarious!