Papabear_08
Active Member
- Joined
- Dec 30, 2020
- Messages
- 26
- Reaction score
- 11
I was in the middle of adding the cargo camera the other day and had to stop about half way. I was however able to:
1. Enable the Cargo Cam soft key.
2. Connect/pin the RCA video cable into the C1 radio harness (pins 21 and 22).
3. Confirmed functionality of camera and soft key when pressed. Video came into the screen.
That’s where I had to wrap it up for the day due to an unexpected change of plans.
A couple days later, I decided to also add a front camera. I wet back into the system and found DTV Front Camera Present and enabled it. That added a 3rd camera soft key just card “Camera”.
Ideally, I want to connect the front camera to to the “camera” soft key but don’t know where it would need to be connected. The C1 radio harness only has enough video inputs for 2 cameras so I don’t think it would be there. Is it just the front camera for the 360?
I’ve searched and searched but cannot find out where it goes. Any ideas?
1. Enable the Cargo Cam soft key.
2. Connect/pin the RCA video cable into the C1 radio harness (pins 21 and 22).
3. Confirmed functionality of camera and soft key when pressed. Video came into the screen.
That’s where I had to wrap it up for the day due to an unexpected change of plans.
A couple days later, I decided to also add a front camera. I wet back into the system and found DTV Front Camera Present and enabled it. That added a 3rd camera soft key just card “Camera”.
Ideally, I want to connect the front camera to to the “camera” soft key but don’t know where it would need to be connected. The C1 radio harness only has enough video inputs for 2 cameras so I don’t think it would be there. Is it just the front camera for the 360?
I’ve searched and searched but cannot find out where it goes. Any ideas?
