Hey guys, bought the 7 pin Curt adapter plugged it in behind the bumper, the plugged in the 5 pin adapter to it. I wired the red wires from the lights together, then to the blue and the black from the lights together, then to the blue.... They don't come on when I put in it reverse? Any ideas what I did wrong??
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Aux reverse lights
- Thread starter COUVZILLA
- Start date
Richard320
Spends too much time on here
- Joined
- Aug 3, 2019
- Messages
- 2,182
- Reaction score
- 2,326
- Points
- 113
The two reds should go to the blue. The two blacks should go to the white. Old fashioned bulbs wouldn't care if things got reversed, but LEDs are still diodes and only work one way.
If the wiring is correct, go check the back side of the 7 pin. Sometimes they take some serious effort to snap into place.
If the wiring is correct, go check the back side of the 7 pin. Sometimes they take some serious effort to snap into place.
