Aux Camera Cabling

[RAM RAM RAM]

Okay, hate to hate on the design, but...I purchased the aux trailer camera kit for a new build snowmobile trailer. Yes, i have the aux camera prep kit. It was installed as a factory option.
Anyway, if you have seen this "kit", it comes with a whole bunch of cords of different lengths, that you sort of daisy chain together to the the desired length, which in my case is about 8 feet short of what I need.
So, I figured that I would just order another 10 ft. section, then my trailer guys can finish building my trailer. RAM says that there is no part number for the cables, only the kit, and that I can order a second camera kit to get the additional 10ft. section of cable that I need.
So, I cannot believe that with every single rivet and bolt, switch and toggle, cap and cover having a part number, that they did not think to give these myriad of 6-pin cables any kind of part number. Although, in the instruction manual, they are referred to as cable A, cable B, cable C and cable D...maybe just ask RAM to send me a cable D?
Does anyone know:
1. If there is actually a part number for the 10ft. section of video cable for the aux camera?
2. If not, I am open to any and all creative solutions. (well, minus the sarcastic and insulting ones)

Any help is greatly appreciated.

 

[Brutal_HO]

Unless something changed, there should be part number flags on each. However, they've never been orderable individually, only as part of a complete camera kit.

You can source the connectors yourself (I recall they may be Molex MX150 series (or maybe that's just the Ford version) and build a cable, or reach out to @Jimmy07 or Nichols welding for a harness.