5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Auto dim Highbeam doesn't work
- Thread starter gbecker99
- Start date
2025 Ram Limited
Well-Known Member
- Joined
- Apr 30, 2025
- Messages
- 459
- Reaction score
- 195
- Points
- 43
- Age
- 59
Is the turn signal lever pushed forward where it should be?
vincentw56
Spends too much time on here
- Joined
- Aug 5, 2020
- Messages
- 4,429
- Reaction score
- 2,910
- Points
- 113
- Age
- 54
Do you get the message about auto-high beams enabled in the EVIC when you turn on your lights?
Yes, the stalk is pushed forward. Thanks.
I used to get that message, but I haven't for about 1 year. Thanks.
vincentw56
Spends too much time on here
- Joined
- Aug 5, 2020
- Messages
- 4,429
- Reaction score
- 2,910
- Points
- 113
- Age
- 54
Do you have LKAS? If so, does it still work?
No, I do not have LKAS. Thanks.
I noticed that the headlight rotary switch didn't change modes when I rotated it. So I popped off the switch cover and noticed that wire connector was secure but the black plastic backing of the switch component wasn't securely attached. I pushed to secure it. Now my rotary dial changes modes and I have my auto dim headlights working. Thanks for your suggestions.
