GM94
New Member
- Joined
- Dec 19, 2025
- Messages
- 4
- Reaction score
- 1
- Points
- 3
- Age
- 31
Hello again!
This is a follow-up/continuation of my previous thread: Lost 4WD After Trailer Use!
I have cleared all the codes in question, but the loss of 4WD remains. I swapped out the actuator this morning, and that also did not fix the issue. When I had the actuator off, I noticed that the tines of the gear for the cap to slide over and lock were misaligned, preventing that to slide over.
What would be the best way to get this lined up right? is it truly as simple as raising the truck and rotating the wheel slightly?
This is a follow-up/continuation of my previous thread: Lost 4WD After Trailer Use!
I have cleared all the codes in question, but the loss of 4WD remains. I swapped out the actuator this morning, and that also did not fix the issue. When I had the actuator off, I noticed that the tines of the gear for the cap to slide over and lock were misaligned, preventing that to slide over.
What would be the best way to get this lined up right? is it truly as simple as raising the truck and rotating the wheel slightly?
