5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

35s with 2 in mopar

Dom507

Member
Joined
Sep 29, 2020
Messages
10
Reaction score
2
Does anyone have pics of mopar 2in lift with 35s with flush fenders no stance if so what offset and does it rub on 5th gen 1500
 

Serc

Member
Joined
Jan 3, 2019
Messages
5
Reaction score
0
I don't have exactly what you are asking for but here is mine: 305/70/R18 (35") +1 offset. I only have a leveling kit and no rub after slightly trimming and bending the plastic in the fenders (probably didn't need to trim at all once I got the plastic to move). I think the +1 offset was perfect.
 

Attachments

  • Screen Shot 2020-10-01 at 12.56.42 PM.png
    Screen Shot 2020-10-01 at 12.56.42 PM.png
    914 KB · Views: 183
  • 20200118_160921.jpg
    20200118_160921.jpg
    118.4 KB · Views: 166
  • 20190427_195037.jpg
    20190427_195037.jpg
    91.6 KB · Views: 146
  • 20190427_104723.jpg
    20190427_104723.jpg
    145.4 KB · Views: 149
  • 20190427_104658.jpg
    20190427_104658.jpg
    188.6 KB · Views: 155
Last edited:

justclements

Member
Joined
Sep 24, 2020
Messages
22
Reaction score
15
I don't have exactly what you are asking for but here is mine: 305/70/R18 (35") +1 offset. I only have a leveling kit and no rub after slightly trimming and bending the plastic in the fenders (probably didn't need to trim at all once I got the plastic to move). I think the +1 offset was perfect.

What tires are you running? Super clean setup.
 

Dom507

Member
Joined
Sep 29, 2020
Messages
10
Reaction score
2
I don't have exactly what you are asking for but here is mine: 305/70/R18 (35") +1 offset. I only have a leveling kit and no rub after slightly trimming and bending the plastic in the fenders (probably didn't need to trim at all once I got the plastic to move). I think the +1 offset was perfect.
Thank you I appreciated looks good !!! But I think +1 will stick out for me bc I don’t have factory flares that come on some of them I have -24 now 20x10s on 33s but I’m sick and tired of **** flinging everywhere haha
 

Serc

Member
Joined
Jan 3, 2019
Messages
5
Reaction score
0
What tires are you running? Super clean setup.
Thanks. These are Mickey Thompson Baha ATZs 305/70/R18
 

Serc

Member
Joined
Jan 3, 2019
Messages
5
Reaction score
0
Thank you I appreciated looks good !!! But I think +1 will stick out for me bc I don’t have factory flares that come on some of them I have -24 now 20x10s on 33s but I’m sick and tired of **** flinging everywhere haha
You are right, they will stick out a bit without the flares. +6 or +12 would suck them in where you want it. Couldn't say if it will rub or not but I think you would be OK if you use a heat gun to bend the plastic out of the way.
 

Dom507

Member
Joined
Sep 29, 2020
Messages
10
Reaction score
2
You are right, they will stick out a bit without the flares. +6 or +12 would suck them in where you want it. Couldn't say if it will rub or not but I think you would be OK if you use a heat gun to bend the plastic out of the way.
Gotcha worse come to worse I think I’ll go with the ready lift 3.5 says 35x12.5r20 will fit with 20x9 +18 so all most like factory offset which should keep me inside fender if not do dealerships sell them own painted flares I think the put them on the laramie
 

Users who are viewing this thread

Top