35/12.5/20 no ucas 2.5 leveling motofab disc

[Xxjosexx1327]

Ok, so here it goes I know there’s probably a ton of discussions about this, but can I fit 35/12.5 r20 on my truck
I’m adding the motofab 2.5 leveling kit & keeping the stock ucas.
2020 laramie 4x4 (ORP) no air ride

 

[Darksteel165]

Ok, so here it goes I know there’s probably a ton of discussions about this

There's a search bar up top.

 

[H2OMAN]

Ok, so here it goes I know there’s probably a ton of discussions about this, but can I fit 35/12.5 r20 on my truck
I’m adding the motofab 2.5 leveling kit & keeping the stock ucas.
2020 laramie 4x4 (ORP) no air ride

You will need the UCA's. Your coils are 1 inch longer than regular coils. So, with 2.5 inch pucks and the extra 1 inch on the coils is going to put you at 3.5 inches. That is pushing your front end hard and you are going to need the after market UCA's to get proper alignment. Otherwise goodbye front end. Or you could go with 1.5 inch pucks and you'd be at 2.5. From there, if you can get a good alignment you should be gtg.