5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

3 inch leveling kit

Badillabefo2

New Member
Joined
Aug 16, 2022
Messages
1
Reaction score
0
Points
1
Age
24
I bought a 3 inch motofab leveling kit for my 2019 Laramie I don’t do much off-roading only city and highway driving will UCAs be needed or you think I’ll be fine for a couple of months ?
 
You may get by for a short time but you will need UCA especially using a spacer.
 
I agree with @397STROKER on this one. I have the same leveling kit on my 2021 Laramie. I originally did not install the UCA's but the shop was not able to get the alignment done properly because of the terrible angles. A couple weeks later, I installed the RC 3-3.5" UCA's and had the alignment done with NO issues. The install is pretty simple once you get the stock UCA separated from the knuckle. Just use some heat, a good mallet, and patience. Took me less than an hour and I have never even changed my own oil (I am NOT mechanically inclined).
 

Users who are viewing this thread

Back
Top