What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2025 Ram 1500 Lone Star / Bighorn w/ Night Edition: RAM BOX Configuration

J

J7RAM

New Member
Joined
Feb 20, 2025
Messages
1
Reaction score
1
Points
3
Age
52
This is my second RAM BOX! Setting it up a little different this time. My tool bag was hard to pull my tools so I built a vertical system with PVC scraps. Still in the prototype phase. "we listen and we don't judge, right!" LOL Pieces cut from 12", 10, 8, 6 from 2" PVC and a few pieces of 1 1/4. Stacked in vertically and smaller pieces at the angle of the rise from the bottom. Attached are the measurements of the workable flat surfaces, I will post templates for the dividers tomorrow. Let me know what you think.
 

Attachments

  • IMG_1038.JPEG
    IMG_1038.JPEG
    146.7 KB · Views: 6
  • IMG_1032.JPEG
    IMG_1032.JPEG
    165.5 KB · Views: 6
  • IMG_1030.JPEG
    IMG_1030.JPEG
    118.8 KB · Views: 4
  • IMG_1029.JPEG
    IMG_1029.JPEG
    107.2 KB · Views: 4
  • IMG_1025.JPEG
    IMG_1025.JPEG
    82.4 KB · Views: 6
  • IMG_1036.JPEG
    IMG_1036.JPEG
    150.1 KB · Views: 6
  • IMG_1035.JPEG
    IMG_1035.JPEG
    111.5 KB · Views: 6
  • IMG_1022.JPEG
    IMG_1022.JPEG
    95.4 KB · Views: 6
  • IMG_1021.JPEG
    IMG_1021.JPEG
    88.9 KB · Views: 5
  • IMG_1020.JPEG
    IMG_1020.JPEG
    166.8 KB · Views: 6
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Total: 416 (members: 27, guests: 389)
Back
Top