Tristain20bighorn
Member
- Joined
- Feb 19, 2024
- Messages
- 6
- Reaction score
- 7
- Points
- 3
- Age
- 27
My truck is a 2020 1500 quad cab big horn level 2. I lucked into a Laramie crew cab donor truck. I swapped almost all the interior bits over as well as the blind spot detection and a handful of other options.Basically my big horn is equipped as a Laramie level 2. With the exception of the forward collision stuff, after reading into I wasn’t interested in that swap. I have gotten everything working for the most part. With the exception of the memory driver seat. I’ve verified the donor truck did in-fact have memory. I’ve played with Alfaobd trying to get any of the memory functions to enable. Now my concern is wiring. I checked the harness on the seat and noticed a lot more wires on the seat side then the body harness. Can any one verify that the floor harness is different or has ran into the problem before and knows a fix. I might not be enabling the correct options.
I did add a limited passenger mirror to enable the auto dimming feature ( stupid how ram didn’t include that from the factory and made exclusive to limited)
I did add a limited passenger mirror to enable the auto dimming feature ( stupid how ram didn’t include that from the factory and made exclusive to limited)