I currently have a 2.5in level in the front, shocks seem shot after 90k miles. Just delivered were Bilstein 5100 ride adjustable front shocks plus 5100 rear shocks. Looking to replace current level with Bilstein fronts set for 2.5in level, will this make the ride rough? Also looking at add 1in or 1.5in rear block while 5100 rears are being installed to help with the occasional tow. Any recommendations? Does this seem like a viable option?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2019 Bighorn Bilstein 5100 front and rear
- Thread starter Cluster12
- Start date
okieram22
Member
- Joined
- Sep 10, 2020
- Messages
- 6
- Reaction score
- 1
- Points
- 3
- Age
- 29
I have the 5100 installed on the front and rear of my 2019 Big horn with the off-road package. I had it done at 4wheel parts and they said that their system said not to go higher than 2 inches (I think it’s the 2.1 setting on the kit) since I had the off-road package. I didn’t do too much probing as to why, but it’s something to consider if you also have the off-road package. I am likely going to get a spacer for the back to get some rake in case I need to tow.
