5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2019 1500 - No power to 12” Screen, AC, front doors.

kapinallinen2

5thGenRams Supporter
Site Supporter
Joined
Jan 16, 2019
Messages
1,719
Reaction score
1,230
Location
Southern Maryland.
I’m still having a similar issue too. U0140 codes permanently on mine showing along with every module having the lost communication with the bcm code.
At first I would get the service electronic stability control followed by No Bus and loss of window controls and AC cooling, then a blip would happen and the engine would cut off but all of the electronics would come back online.
Now it just blips with none of the previous warnings and the engine cuts off but will start back up each time so far.
I had this part 68321746AA- can buss connector replaced behind the headlight switch while at the dealership but that didn’t fix it.
Seems to cut off about every 30 minutes of drive time or so
Just a WAG, water damaged RF hub pulling down the CAN bus?
 

Users who are viewing this thread

Top