Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I may not be a good test case because I live in West Texas where it hardly rains, however, I added Permatex back in November and after multiple car washes, still no leaks.
Right. A good squeeze will get it in the crack and because its flowable, it will make its way down into the channel. I'd tape off your paint and top of window to keep it clean.
Yes, I just did the top channel, thick, from about 4-5 inches past the slider on the driver side, to 4-5 inches past slider on passenger side. My main crack was right at the corner of the slider on the drivers side. So far, no leaks since applying Permatex. Mine fills the channel almost up to...
It was a pain in the butt doing those map lights, wasn't it? I did mine a year ago but didn't use lasfit. One of the lights flickers now so I need to replace but don't want to mess with changing them since its a little difficult...and afraid I'm going to brake something.
No leaks after the car wash! Permatex did the trick. Hopefully it lasts for a while. I don't plan on messing with replacing it since my ext. warranty doesn't cover leaks.
I added almost the entire tube of Permatex underneath the brake light and about half a foot past the slider on both sides. It was pretty thick, basically filled the entire channel. After my water test, no drip on the inside. That's the first time I've not had a leak. I'm going to run it through...
I just went any got some more Permatex and cut a larger hole and got pretty good coverage. I'm going to let it sit for 24-48 hours and test it out. By looking at it, it seems there is no way water could get in once its dry.
Has anyone tried running some Gorilla tape or any other waterproof tape in the window channel? I'm wondering if that would help. I know water could still get in or under but maybe it would reduce the amount of water getting in as a temporary or "good enough" solution. In my head it seems like it...
Have you tested it with a car wash/hose or had rain since it was replaced? Curious how it is.
As for replacing the 3rd brake light gasket, I did that with a marine gasket but when I took the original off, I didn't see any evidence of water leaking through the gasket. I guess its possible it...
I'm thinking about doing what this guy did. I've tried sealing the back window, replacing gasket, etc. with no luck. I'm hoping if I can see exactly where the water is coming in, I can have better luck. Its coming in up under the headliner but I can't tell from the outside so maybe the inside...
No luck on my FlexSeal. It rained yesterday and had the same leak. I'm about to start looking for another truck, this is crazy they continue to have this problem and don't address it.
I just sprayed a bunch of black Flex Seal in the channel above the window, below the break light. Never used Flex Seal before so we'll see what happens tomorrow after 24 hours. I wasn't brave enough to try and spray blindly inside the cab up under the headliner.
No, its not.
I did just find a video on partially removing the headliner which doesn't look too difficult. You remove the 4 Airbag plastic covers (Two on top of headliner, other two on the side near the seatbelts), remove the 4 screws behind that, and then it should come down enough to allow me...
Tested this morning and still have a leak. I'm pretty surprised at this point, I've used a lot of silicone, seems like it would have sealed any cracks. I'm about to just stuff a sponge up under the liner and window and inside and call it good. My extended warranty does not cover water leaks and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.