Search results

I think a few people used the license plate screw set like this. I used them to mount the module to the dash frame. https://www.walmart.com/ip/650289724

I had the 26 gallon and swapped to the 33 gallon in June. My old tank would not let me fill up. I also changed the evap canister and filler neck at the same time. Good ever since.

I had the same question. I ended up using some little coarse thread screws I had laying around. They worked fine for threading into plastic. I think they were around a quarter inch long if I remember correctly.

I used Mopar 68402095AA for the driver side. Heated, dimming with BSM. I read that the aftermarket mirrors amber indicator is not bright enough to see during the daytime.

Some of the files in the Google Drive folder are showing but inaccessible. Says original file cannot be opened.

Everything I used is in the Google Drive link posted many times in this thread. https://drive.google.com/drive/mobile/folders/1TB8V0Mi-geI14ZDDnoIlz8s293IfjAeY?usp=sharing

I bought a used one on Ebay for $50 for a spare just in case I broke mine during the swap. But checking today seems like the used ones doubled in price. Not sure how you feel about installing a used fuel pump for around $100 but it is another option.

I hope that used tank is the updated version. I see that it has the green filler neck on it. The one I bought new had a grey filler neck. I replaced my 26 gallon tank that had filling issues and it had the green filler. Not sure if that has anything in common or not but just an observation.

Made my appointment 12/6 for the warranty window replacement

Finally got the official FCA warranty extension in the mail for the back window and third brake light. Prior to this extension I was out of warranty when I took it to the dealer the first time. So I went ahead and bought the new updated third brake light and installed it myself. I did the window...

Did the passengers side today. As you can see on the old manifold that I tried the JB extreme heat. It held for a few days lol.

Passenger side cracked. Ordered it from Steve White Motors 11/6/23. Got it today. Ordered the driver side just to have on the shelf from Tobin Motors and it shipped out the next day. Both via the Mopar eStore website. I found that if you switch up the zip code and search different dealers you...

BSM LED tail lights work with the 300AA harnesses on the left and right side if you depin pin 8(extra ground) on the driver's side.

If the "tough" connector you speak of is the vent line with the blue clip, the guy in the video did that one wrong. You pull out the blue locking tab and just press in on the white part like a button. I came right off for me, even with one hand reaching in from the wheel well. Just letting...

Yeah I read that post you wrote about this tube. You are right about the one end up front by the engine. 2019 has the 90 degree elbow and the 2020+ has the 90 plus a few inches before the fitting.

I went ahead and ordered vapor tube 68298314AB and turns out that it looks exactly the same as the original one I ordered 68307831AB. Picture of the tubes side by side and picture of both part number tags.

Does anyone have the part number for the pins to populate this connector? It's for the door module. Thank you

I also noticed that both tail light jumpers 68357220AC & 68357222AC have been replaced by one single part number 68489300AA Edit: Just read that this will work with the removal of the Black wire in the #8 slot on the drivers side harness.

These are the screws that I'm looking for.