Search results

I've been using Dupont krytox gpl 205 grease on seals, gears, tracks, and like where those screws go

Appreciate the tip, I did regularly clean and line the seals. My go to is dupont krytox gpl205, it’s around $80/2oz tube. Unfortunaly, that wasn’t the sound I was hearing. This was more plastic on plastic than the dry rubber skidding over metal sound. You can probably see how much extra lube...

seems to increase in colder temps, but its been like 2 years this has been making noise all year

solved! spent some time partially dropping headliner again and started loosening/checking bolts and hardware. I found these screws while checking things to be tight. *note they were not tight, and I think this is by design so they can swivel. anyway, I tightened them up, and noise got WAY...

not mine lol. makes clicks, creeks, cracks, pops, rattles, etc.its awful.

mine doing the same, drives me nuts. tried a bunch of stuff to fix, no go yet.

during turns and slow speed, in and out of driveways, etc, I can feel clunking thru the steering wheel and thru the floor. like sometime is lose re-torqued UCA, upper and lower balljoint, sway bars and links are also new been going thru and trying to get rid of the clunk also torqued the upper...

Don’t think it’s the rear window, checked that a few times and seems to be ok. Thanks for the tip though!

yone have a fix for headliner/pano sunroof rattle/click noise over bumps? Been battling for a while, trying different fixes. So far - lubes seals with crytox 205, dropped headliner numerous times to secure wiring, tighten speakers, added dynomat/foam around things that seemed loose and might...

button press + no LED -----did you try a different battery for heck of it? even though it read 3.0 volts, if its 3 years old, it might just be a weak battery.

shifter should work, you just have to configure the BCM correctly. and this is where you really need a factory truck config to copy the settings from. you can try to guess at them and you might get lucky, but its tricky. assuming its wired correctly you for sure need to configure the...

you need to read codes with jscan or alfaobd, all modules to see what isn't happy. you can't go by the warning lights on the dashboard to tell you what is incorrect. did you change "shifter type" in the BCM vehicle settings?

have done several keys, never tried a new RFH, but I did try a new/virgin BCM and was not successful. tried various procedures with jscan, alfaobd, cda6, witech2.0 (aftermarket account), and also a friend who is a locksmith with credentials tried with his tool, and we could not get the BCM...

If your truck is new/very low miles, it may not activate until it reaches a pre-defined break in mileage.

5 years later, WOW, rattles are back!!! Velcros are not staying put. stay tuned. going to try some other solutions

I dont get it how can they be that bad?

g3's are fairly new. g2's are the old ones

BCM will probably need to be replaced...at least thats what my 19 needed.

cool!

this is really odd. I have a friend with a cluster swap and also is receiving the "--" display. but his truck is not factory digital cluster and is modded, has alternate TCM, etc. your truck being factory digital cluster, and working before bcm changes, makes me think there has to be some...