Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
So I contacted Pacbrake about the "new" part number that another member earlier said was being superseded to and asked what the difference was as well as lead time. This is the response I got back and I'm wondering if the new "updated" seal from the new part number will prevent future problems...
I'm fairly new to tuning myself so I could be wrong in my thought process here, but it would be nice to get the efd files for a G/T (Having BSG), a TRX, and a 5.7 hemi for the TCMs and compare them all. Then pull only what's needed so you wouldn't have any MIL lights for not having BSG or crazy...
Ok. I'm looking at getting a Diablo Sport Tuner here in the next few months, and then I'll probably be on the hunt for someone to tune it with the TRX wheel if I go that route. Thanks.
I'm looking at doing the TRX wheel swap for paddles and was able to get this software version, but my truck is NOT BSG. Do you know if this software version would still work? Was hoping I could just re-flash my TCM change the BCM to what you stated for the shifter values and away we go.
If you know the size of your current setup and an idea of what you want for your future setup, this is the web site I've used for other vehicles to get an idea on if things will rub or have issues. They do a great job at explaining what changes and if it's closer/farter or better/worse...
This is the aiming procedure for the head lamps right from the Mopar 2" lift kit. Looks like at 25' away they are saying center of head light pattern on wall should be 1/2" lower than the distance from the ground to the center of the head lamps on the truck.
I could be wrong, but I'm seeing the 68583952AA number as being the RF Hub module used for your key fobs and such. The two items that I see showing up for a 2023 Ram 1500 for trailer tire pressure monitoring are 68526635AB for the receiver and 68493608AA for the module itself. I'm not sure on...
So on this topic, I was wondering if you could take the limited headlights, and a TRX grill and under headlight trim piece and fit them together to put on a rebel? Any thoughts or ideas? I think the limited and TRX are the same headlight shape and the grill/trim pieces from the TRX I think are...
So I'm looking at doing something similar on my '21 Rebel, Bilstein 6112 struts & springs fronts (set to 8 for 2" lift) and 5160 rears and some UCAs but had a question on the springs. I also tow a 10K lb RV and want to keep some rake in the truck. I've been on ICONs web site for the 1.5"...
Oh, I couldn't find any relating to the Net Audio system. They just came out with it like 2-3 months ago so I was hoping someone might have already tried it.
I'm looking at replacing the factory sub in my Harman Kardon system but want to keep it behind the rear seats. I fold up the rear seats so doing an SKAR audio or MTI Acoustics under seat box is not an option. I was looking at a kit from Net Audio and was wondering if anyone had any experience...
I decided against doing anything with the fog lights. Didn't want to cut into my stock wiring and at the cost, I'd rather do a Ready Lift SST lift kit instead of fog lights.
I'm looking at installing a set of M&R Automotive dual function fog lights on my tuck and was wondering if anyone had experience with using a different fog light on OEM plug. M&R says to run their fog light to an aux switch because of amp draw, but I would like to keep mine running off the...
Was able to find these settings and turn them on in AlfaOBD and now I get the soft key in the radio for the trailer guidance but still no lights. The running light feature on the mirror doesn't work and neither does the little white LED on the mirror when you put the truck in reverse or with...
So the Module location was already set to IRCM and I changed the CustSetMenu 1 value to Yes and the soft key shows up in the radio now. How ever the feature doesn't work. Turning my high beams on, I get no message on the dash say "Auto High Beams on" like what my wife gets on her Laramie. It...
So I'm having a problem finding the Mirror running lights and Mirror rear guidance lights setting in AlfaOBD. I'm new to it and running it on a laptop. When I select my truck and BCM it will connect to the 2021 Powernet for DT as it should. However there is no option for these two features in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.