Search results

Great post! I had the same OBD code on my 2019. Disconected the air dam plug, cleared codes and it has not repeated. Will have to try this repair next. No recall posted for my VIN like others have noted.

I also have the 5.7 (no E Torq) with a 3.92 and with it in tow/ haul, the MDS does work a few times. It will also hit 8th gear occasionally on level ground. This is with it towing a 5000lb boat.

Installed a set of Eiback E60-27-011-03-10 shocks. Just under a 2" lift to fit stock Rebel Wrangler 275/70R18's. Rides well and less rear squat towing than expected.

Welcome! And Fins Up!

Hey all, Just added a set of OEM Rebel wheels & tires to my 2WD Bighorn. I recently did a 2" front level by adding Eiback E60-27-011-03-10 shocks. No issues with clearance and no wheel rub. Ride is a little stiffer than stock as expected but still good.

Yeah I didn't want one until I saw this one. Doesn't take away from the look of the truck. Plus it gives a place to put the park sensors that yoy can't on others. The fender flares fit pretty good. I had to notch a few holes so I could tighten them up to be flush. Overall happy with them.

TAC Predator. Decent build and easy to install and adjust.

It's a TAC Predator

Attaches to bumper mount with support bracket. Factory tow hooks will clear fine. One bracket would goe under one of the tow hook bolts. Custom sensor location on the crossbar just above the lights. Used Westin 40-0045s kit for harnesses. Install took about 3 hours by myself. Another hour for...

Yes had to punch a hole in the lower air dam and custom cut with a box cutter. Surprisingly it cut very easy with the knife. Was much easier than pulling it to cut. I bought a Westin sensor relocator kit p/n 40-0045s and just used the plug and play harnesses and the pass through grommets for...

Installed TAC Predator Bull Bar, Red Emblem overlays and Icon Motorsports OEM style Fender Flares. Still need to do a black refinish to the running boards.

I like it on mine

I finally got the time to do the install. Here's the link to the kit I bought. https://smile.amazon.com/dp/B082FH48RB/ref=cm_sw_r_cp_apa_glc_fabc_5FCXXNG8APYWQSSV4KG8?_encoding=UTF8&psc=1 The kit is not exactly what is pictured. Brackets are quite different and the harness has plugs on both...

I've been looking for the same thing. Putting on a TAC Predator Bull bar and need to relocate the sensors. I finally found a kit that will work with the 5th gen. Westin 40-0045S black or 40-0040S stainless. Around $80 comes with housings and hardware. Will post once everything is done in a few...

I still have the black factory rails, however no Ram Boxes so it could be different.

I have the Mopar p/n 82215227AC on mine. I ordered a couple replacement parts from BakFlip for the G2 p/n 226227 and they fit perfect

I have the Mopar trifold which is a rebranded BAKFlip on my 2019 and have no issues with sealing. I live in central Florida, kinda known for a few storms! It does however need to be installed correctly. Mine was installed 1/2 too far forward and didn't seal at the tailgate until I adjusted it.

Kissimmee area (and no I don't work for Disney)

I bought this one on Amazon. Clips under the rear floormat just behind the console. Stays in ace and looks good. Holds a plastic grocery bag perfect.