Search results

Short answer is - I made it. I was unable to find the exact graphics I wanted (didnt like the glossy black of off the shelf ones), so I bought the equipment to make them myself.

I have done several changes/tweaks since I have had my 19 Bighorn. But the latest is the new decal on the bed, I just like mine looking different from the others around. It is a carbon fiber vinyl decal.

I didn't change the tires, but did the wheels just so my truck didn't look like the others around town :sneaky:

Yes, I made the graphic (using a silhouette vinyl cutting machine) and applied it to my 1500.

~5k miles on mine, still love it everyday!

No problem - just note there are 4 pegs across the front, as far as I know the two closer to the middle of the hood are adjustable. The other two I could not find any way to change them.

Mine had the same issue, just on the driver side though. It was an easy fix - there are 2 adjustment knobs (at least it seems like a knobs?) under the front edge of the hood that you can twist to raise/lower the hood adjustment. 1.5 quick turns for me - everything was lining up as it should.

Here is mine, Big Horn 4 x 2 Hemi, now realizing I need a new full-side picture with the decal installed :)

I have the 8.4 uconnect w/out NAV - I am able to turn it off/on - I don't see any options for sensitivity?

The new RAM's do have an active breaking system when backing up. I ended up disabling mine as it was constantly stopping me from backing into my driveway which does have a mild slope (not drastic enough in my opinion for it to stop me). I don't know if there is any way to get it tuned or not, I...

Added some graphics to the bed of the truck. I love the way these look, and can ensure mine stands out from all the other red trucks around :)

I recommend pulling down the overhead console. I tried replacing without taking it down and I nearly broke one of the bulb holders!! I do have large hands, but I doubt anyone but a small child would be able to grab/replace those bulbs. there are 2 screws & 2 tabs in the sunglass holder, then it...

I will try to double check this evening, but I think mine only turn on when the door is open. All other vehicles I have had would turn on all the interior lights when you rolled the dimmer/slider all the way to the top - but the 19 RAM does not appear to do this. The dome light is a pushbutton...

I would like the front sensor beeping fixed PLEASE. When backing up and getting close to something the software is smart enough to know that when I put it in drive - the beeping stops (because I am no longer going backwards. However the front sensors don't react the same. If I park near...

I have not seen these particular step bars. But the bracket pictured looks like it may be for the other side of the truck? I am only guessing because it simply looks backwards, is the other bracket bent the opposite way? If so swap them?

These are the ones I put in mine: https://www.amazon.com/gp/product/B07D1FVK93/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1

Map light bulbs: https://www.amazon.com/gp/product/B07C1X5HZJ/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 Dome light: https://www.amazon.com/gp/product/B018ACFA54/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 It is a little funny, but the dome bulbs is a box of 10, and we only need 1, but...

To be honest I don't know. I have a local exhaust place that has done my last 3 vehicles and I trust his choice on these. He went with the Flowmaster instead of Magnaflow and left the rear resonators. Inside the truck - I can hear the rumble when it is running but it is not overpowering or too...

It was very easy to install. I did have to figure out where to place the brackets, previous years had dimples where the bracked was mounted the 2019 did not, but again it was not difficult to line up/mark and drill. Here is the extender I have if you are interested in the one with the RAM name...

To be honest the covers were easy to pop off, but getting the stock bulbs out was a major PITA. I admit I have large fingers but the way they are offset/installed I am not sure if smaller fingers would even help. I did end up pulling the whole console down (it is very easy, 2 screws, 2 tabs in...