Search results

Has remained practically unchanged. I’ve towed my travel trailer and boat with it. Long up hill pulls it’s a little louder in the cab as expected but my now 6 year old has never had a problem staying asleep and still not any drone. At times I wish it was a little louder now but overall for...

Maxtrac 2/4 20x9 moto 970’s

Do you happen to have the part number for the rear shocks you used from Bilstien?

So I thought I would give a little update on my Maxtrac 2/4 drop kit. I did install helper bags when I installed the kit. I already updated on the alignment deal, but to recap front caster and chamber are technically out of spec but they are less than 0.5 degrees from being working specs and...

I just installed this in my 2019 ram 1500 4x4. It’s a pretty simple and bolt on kit. If you haul anything I would recommend adding some air lift helper bags. I talked to Maxtrac a few months ago about the trac bar and they informed me Ram apparently used 2 different length track bars. I do not...

Yes it is.

Well I went ahead and installed the kit along with the airlift helper bags. I did not try to lower the front to the lowest setting(3” lower than stock) but did go with the middle position(2” lower than stock). Got the alignment done today and the caster and chamber are close but barely out of...

For those of you with a lowered truck and using an adjustable rear panhard bar, are you using a relocation bracket as well or no?

What’s the complaints with the maxtrac 2/4 drop? I just ordered the kit and rear helper bags.

Took a short in cab video on my drive home from work this morning. Overall I’m very pleased.

I didn’t notice any difference in sound, just for looks mainly. They do fill the void in the bumper much better in my opinion.

I believe he still offers them. He had a post about them just a couple weeks ago. I think it was the 5th Gen Ram Owners Club page on FB.

It’s a little louder than I was hoping for on cold start but once warmed up it’s not bad at all. Normal driving and cruising at 60mph if you pay attention it’s louder than factory but still very easy to carry on a conversation, listen to music down low(6-8 on volume), and was overall a good...

Thanks, I bought the overlays off someone on a FB group. I have an overlay for the 3rd brake light too that I need to put on.

Here is the initial cold startup before weep holes in the resonators plugged.

A little background: I was looking for a muffler for my ‘19 Ram 1500 that would give it a little deeper tone and slight increase in overall sound. Now we pull a 7,500lbs travel trailer fairly frequently so I didn’t want something obnoxious while traveling with the family for several hours and...

I was looking for something slightly louder than the factory muffler but not crazy loud as I pull a camper often and don’t want to be obnoxious in the camp grounds. I decided to take a shot with the Proven Ground C&L muffler and tips as that’s exactly what it claims to do. Supposed to be here...

According to the instructions with the Airlift 1000 helper bags they say run them with a minimum of 5psi to keep them seated against the springs and to prevent any chance of them getting damaged. I did not measure with them empty but did measure them with 20psi and really saw no significant...

They are installed correctly and the isolators are in there correctly as well. I measure just under 36” from ground to fender in the front, 37.5” on drivers rear, and 38” on passenger rear AFTER the spring install and helper bags at their 5psi. I purchased the helper bags they recommended for...

For those of you that have had to cut these to achieve the physical 2”, how much does say trimming 1/2 coil and 1 full coil net in drop? I need to cut mine as I only got about 1/2” of drop.