Search results

zajaco My bad on the late reply. I didn’t do anything before “write suspension height values” besides a few mistakes that you wouldn’t want to repeat

Strange. I haven’t had it in my shop to measure the heights a second time since I made the changes, but every time I’ve checked it out since making the changes it’s looked perfectly level to the eye. Also for context if it helps, I’m a machinist so I’m super OCD about the tiniest differences in...

Update: After fine tuning, I was able to take out the factory Driver’s side 1/2” drop with values 120/98/80/70. At wheel center the front wheel wells both measure at 42.5” and the rear wheel wells at 42.75” on level concrete. (That’s with Daystar spacers & fully shortened AirLinks in the front...

That worked — she‘s off the ground again! What a relief. Now to get this thing into my shop where I can take accurate measurements and fine tune the heights. I greatly appreciate all the input and support on the topic. Thanks again!

Thanks for the info. So based on what you’re saying I take it that the vehicle should appreciate me plugging in for example 111/100/79/68 into the “Write Suspension Height Values”?

I also have yet to see anyone comment (or anything on the forums) specifically on the “Set Ride Height Level” setting I messed with. There seems to be quite a bit online about “Write Suspension Height Values”, but nothing about “Set Ride Height Level”. I hope I haven’t gone too far into...

I did a backup of my current config and then tried to restore vehicle config from a backup file that I saved in October and it gave me this

Does that BCM .txt file contain the same info as the “Faults and Status Log” or is it entirely different? I did print off that log earlier to compare new values to old and I ended up with more questions than answers lol

That’s good to know! So the BCM file includes parameters for the ASCM? I ask since I made changes to the ASCM and no changes to the Body Computer. I guess that would make sense if it did include the ASCM parameters since there are no Backup/Restore file options when connected to the ASCM.

I’m not the smartest when it comes to AlfaOBD. When you say apply my original configuration do you mean just type the numbers back to what they were before? Here’s where I’m at: The original “Calibrated Height” values were 0/0/0/0 which is the numbers (I think) I originally changed, and now...

Hello so I have an issue with my 2022 Ram 1500 Limited (with air ride). Last night I changed 2 settings and my vehicle is now stuck in what appears to be Entry/Exit Mode while indicating that it is in Off-road 2 Mode. [see IMAGE #2] [IMAGE #2] [IMAGE #3] 1.) First off I used the “Write...

Thanks a ton!

I recently bought a ‘22 Ram 1500 Limited and I also want to be able to have all my lights shut off while the vehicle is running. How do I get to the setting on AlfaOBD to have the eyebrow lights shut off while the vehicle is running?