Search results

Lol, yeah, was kit having fun in the snow. Aftermarket front bumper really opens up the engine bay. But, there was very little in the Vararam, which some people had concern about .

The stagger is because the track width is staggered from the factory with the front being 1/2 wider overall, so 1/4" on each side.

Has to be different based on the wheel/tire package. On my Built to Serve, 3/4" front and 1" rear set the sidewalls of the factory 275 width tires flush with edge of fender flares. Now that I'm on 35x12.50s they poke out about 1/2". Which puts the edge of the tread blocks about even with...

You aren't force feeding air into the intake. Even with the shutters open. The engine is only going to suck in as much air as it needs. And that comes from in front of the radiator. The grill shutters are not a restriction. I left the radiator shroud on mine, kept the RAM lettering, and...

I've had mine for over five years. Verified improvement in 0-60 time over factory. Plus, IMO, it's just the best looking intake available, especially if you do car shows. Only issue I've had was the install thin "gasket" the filter sits on, in the base, shrunk a little and had a gap which let...

Can't remember if I updated this thread or another. Over 75k miles on my truck. Overflow tank topped off once because dipstick was dry. That was at like 30k miles . Coolant still full, dipstick clean no build up on it. And I still get the coolant smell on a hot engine every now and then...

Sounds like you got it figured out. I'm not a fan of auto high beams. Turned them off in every car I've driven at night that had them.

Not real sure

What size is on it in picture?

Eye brows are fine. Not as much water used and easier to contain it and keep it from getting in drivers side kick panel area.

As long as you don't have to make the holes bigger.

I'd recommend a minimum of 12' ceiling for a lift if you want to work comfortably under the vehicle. You can find all sorts of different lifts depending on what you want from them. A 2-post lift is most popular for general automotive maintenance, because it leaves the center of vehicle...

I thought the 33 gallon tank was standard now

More body panel screws, not bolts.

Mid terrains work good in deep snow but not that great on hard packed snow or ice. Some are able to be studded though which would help

Based on OPs own comments he understood there was a risk. There does not need to be a written waiver of liability.

Completely different circumstances.

I would never expect, or even ask for a shop to replace a part I knew could get damaged when doing something I asked them to do. Morals count.

It's not their "mistake". He said the shop used soak ropes and towels, so they took measures to minimize the risk, but there is always a risk that the OP understood could happen. Just like when getting chips in windshield repaired. Shops will tell you there is a chance the chip could spread...

Good to know. I thought I had seen others post that they were just caps.