Search results

My 2021 is lifted 6" and the radar is in the windshield. I don't have this issue. Could be something that was disabled if they calibrated the wheels over 35". I have my wheels calibrated under 35".

The bolts on both sides are pretty tight. I even bang on the sway bar with a rubber mallet to see if I heard if anything was loose. Last time the sway bar links were loose. We could hear them while hitting with a Rubber mallet. The driver side links themselves seem to twist easier by hand than...

Came across this today. Looks like a replacement bushing. Wonder if it’s just a different manufacturer is making them or If they are an improvement to the previous. 68264638AD https://static.nhtsa.gov/odi/tsbs/2024/MC-11010972-0001.pdf

Ok so I thought it was gone. I notice the noise/clunk mostly when slowly turning left and truck moves side to side a bit. Does that sound like sway bar end links or tie rods?

noticed the same thing with me.

Just drove today and it seemed to have solved the clunk. Will give it a few more days of driving to be sure.

Not sure. I didn’t really look when I was replacing them. The bushings looks cleaned like you said but did notice they seemed to be thin on the bottom end. I haven’t driven the truck yet to see if it resolved the issue.

Just did my front sway bar bushing replacement today to the energy suspension bushings. Was hearing clunks when turning into certain roads. Will see if this resolves it. Bushings only had 48,000 miles but I am on a 6 in lift and may be stress on them. If not, I have new end links and can replace...

Just bought the energy bushings. Which way should the split face? I have read forward towards the front of the truck but then see video that says facing towards the back to avoid water and dirt being pushed into them.

I know this is an old thread but is there a way to wire the rock lights to come on when you unlock the truck and the puddle lights come on?

thank you for your service! 🇺🇸

Decided to go a step more patriotic and added the tail decal.

Added a Flag Decal to the rear slider.

He posted it on the previous page Post in thread '4 Wheel Drive (4WD) Not Working' 4 Wheel Drive (4WD) Not Working

I am getting ready to apply a vinyl decal to the tailgate of my 1500. I have read online to be careful using full strength isopropyl alcohol and to dilute it. Also read to stay away from isopropyl alcohol completely even diluted. What have you all used?

I do the same and my dealer also takes pictures but I still do my walk around with them before I leave and when I pick it up.

Happen to mine on one rim a few Years ago. Showed the tire shop before I left and they ended purchasing a new rim replaced it. A good tire and rim shop will have the proper equipment to do a mount. Reason I now don’t use the same shop that initially installed mine.

Welcome. Only thing I found so far https://static.nhtsa.gov/odi/tsbs/2023/MC-10241021-9999.pdf Maybe try 93 Octane if you have it. Not sure if you can check the oil level in the hurricane engine but there is known bulletin for a oil leak from the oil drain bolt.

Check out the news. It was pretty bad due to the over 20 inches of rain and all the tornadoes. I have seen so many homes here locally that are under water where they have never flooded and so much wind damage. Here is my cousins house where we are at today helping. The river behind his home...

Thank you, It’s been a crazy evening so far. I’m 20 miles northeast of Tampa and we are getting 90 plus gusts and so far over 20 inches of rain. Bad thing is it’s all happening overnight. Won’t know the damage until tomorrow morning.