Search results

Ive been happy with my Mishimoto catch can, it was expensive but high quality and works great. I got it because the kit clears my s&b intake while the engine mounted ones don’t. Empty it out very oil change (3500 miles or so) and there is always 2-4oz of oil/water/slime in it. Catch cans on a...

A photo of what I used, and I he next step after the rest of the system melts away😁 45k miles for reference.

Its a grade 10.9 bolt i got from autozone in an automotive kit, had it on hand already so in it went. I actually did think about doing the other one but its still solid so im not going to disturb it. Ive fixed too many things that aren’t broken and paid the price. Leaving on a 500 mile trip in a...

So yesterday I started my truck and it seemed way louder than normal. Walking around the outside it seemed exhaust related. Crawled under there today to inspect and sure enough I found a broken flange bolt. Was on the second downstream flange. It was hard to spot because both parts of the bolt...

Cleaned it out a vacuumed it! Also did an oil change and emptied the catch can.

1 week update, this is still working great, no reset. I may have cracked the code 😁

Well good news gents, I got the theme to stick without a tazerDT running the v18 software. Its only been a couple days but changing it to the rebel theme worked. Ive remote started a few times, and been driving all over and its working! I could never get it to stick for more than a couple hours...

Ive been following this for awhile trying to figure it out. I have a 19 8.4” nav system. My theme has always been reverting since it was new. Recently i bought a security module bypass cable an obd2 bluetooth module and the jscan app. Worked great to change a bunch of settings, set my bigger...

It did clear without modification, but i was able to route the hoses a bit neater and remove a funky angle and about 2” of output hose by turning it slightly. Took about 60 seconds with a step bit to make new holes.

Installed my new dry filter s&b intake and drilled new holes for my catch can to clock it about 60* clockwise so the hoses would clear the intake tube better.

I shaved my tailgate emblems today too lol. Also plasti dipped my chrome ram badge flat black.

Installed some custom fit seat covers. Prime day purchase…

Pulled a 24’ center console out of the water and towed it around town

They seemed to be the same all over about $210. I went this route because it is known to clear the cold air intakes (doing that next) where the engine mounted style does not clear them. That being said the mishimoto kit is extremely high quality, everything was packed great, fit great...

Installed a mishimoto catch can! Should have done it awhile ago… live and learn.

If I end up cutting out the liner ill post up the pics!

Yes the last couple pics show the finished product. Look closely.

I run car seats too… 😀 I actually removed the headrests on the first day of ownership despite being told they “couldn’t be removed” If I remember correctly I used a paperclip to unlock them.

Yes this is a crew cab, bighorn trim.

They still stay upright, there seems to be a detent built into the raised position. Its not quite as tight but it still stays up. If you really want to make it tighter you could probably cut slightly less, like 1.25” off the hooks and then its really tight to get it to fold down or reattach...