Search results

I had the same thing happen but if you do system status read it will show you it’s valid for one of them. So far i have had no issues. You can look at my post above. Some people say it works even when it says failed and it seems to be true.

If vin showed up after you did system read it worked. If not disconnect battery for 30mins and retry. I had to do that once when i initially started. But after i was able to get vin to all ? after vin reset i followed post #812. Between each step i had to cycle ignition twice, run reset ecu...

I had the same issue when i did this a few days ago. But after i restarted alfa app a few times and reset ecu it worked. The vin will be matched only when the static ecu initialization completes and the other codes are likely because of that. Heres what i suggest. Do reset vin values. Let it sit...

Thank you!!!!! vincentw56 Jimmy07 Sohosys and others I have successfully swapped a USED 2024 abs/hcu unit into my 2019 Laramie. Took about 4 hours and almost 32oz of Dot 4 fluid with power bleeder. I have 0 lights on dash and no error messages. Also i didn’t do DASM module yet. Waiting on...

Yeah im suspecting camera as well. The part number is right (i checked camera housing 68448640aa) and i did eliminate the fakra cable by removing the camera from CMHSL and plugging it into mirror with a different 1ft fakra cable just to make sure its not a signal loss by long cable but still had...

It came from a used vehicle but the seller is reputable and i bought stuff from them before. Im starting to think its either the camera or mirror module but i think mirror is fine because it at least displays something and i don’t have any way to test camera or know if its working unless i get a...

That is for the ACC DASM upgrade and the other wire is for my radar detector. The DASM wiring isn’t connected to anything yet. I just ran it to headliner and the radar detector wire just taps into mirror connector for power.

This is the connector i am using coming directly from the mirror. Did you have something different?

I only get U1514 but thats been there for a while since i replaced SGW with Tazer DT

I have 2023 BCM installed in truck by dealer when i did aux switches. I have the MY set to 23 as well for Uconnect 5

Hello, i did the chmsl and mirror upgrade but im having issues with mirror. I did make the 2 changes in alfa. I have a 19 truck with 2023 BCM Here is a list of parts i have: 68448640aa chmsl camera 68448641ab mirror Im having no display show up on the mirror regardless of where the tab is...

Jimmy07 vincentw56 I have done the Analog cargo camera upgrade on my 19 Laramie with the uc5, 23 BCM, and aux camera enabled. I have the softkeys for aux cameras but when i try to go into settings and rename it i see this “Wireless Cameras disabled” pop up and the new name is greyed out. Once...

Jimmy07 is there a way to fix mileage problem? I have got the digital cluster but need to get this sorted out.

Thank you @vincentw56 and @Jimmy07 for the detailed write up and wiring. Finally got everything to work and the magical number to get front camera calibration was 2-3mph. I do see a softkey for all the cameras at bottom half of my screen except front camera. Is it normal or am i missing...

You can try searching in forums for google drive links. Thats how i had found mine and got it updated. I have the files for the 3 versions i mentioned. Jimmy07 might have all the versions in between. From what i heard its sequential updates so we can’t jump versions.

It’s your radio software if your BCM configs are set and you reboot everything 3 times. That uconnect site is no good. It always says up to date but it’s not. The way i updated was someone had posted the links to download software from google drive and i downloaded it and flashed it on my uc4. I...

After Swap you should end up with something like this: Note the difference between the left relay and the one circled. 8. Now that we have relay setup I recommend adding a fuse to this setup since by default all the relay coils are directly connected to battery. Just in case something was to...

Here is my implementation of all DIY setup. Get more than the required amount as it is easy to mess up I use MOUSER and Amazon for all my parts mentioned Pins: 1393366-1 Get 10 or more 1438299-4 Get 5 or more Connectors (You need one of each since I did a Y cable): 6-1419167-1 146989-3 If...

Yes i use Alphaobd and i select 22+ in alpha app menu for computer version. You don’t have to change any configs honestly. I was able to connect with other menu versions as well. Only reason i did change my year was for uconnect 5 upgrade and inputs. Its in one of my other posts why i had to...

Update: so setting the Vehicle config1: Model Year to 2023 makes the aux 1 and 2 camera show up but i loose the backup camera lines every key cycle since my truck is a 19. Do i need to replace some module from a 23 truck? Jimmy07 or anyone else know a workaround for this? I just need one of...