Search results

I am starting another Mod. Before I can move on it, I am asking for any member that has the factory Alpine system to post pic(s) of the three connectors from under the drivers seat. I am looking for pics for the two gray plugs and the one white plug from the wire side... Appreciate any and...

I think this is it... -=FM45=-

Hope this helps--- edit--- just re-read your issue... --- look for the thread about adding passive entry, there is info there on removing all and getting to the 'inside' door skin.. -=FM45=-

here--- https://5thgenrams.com/community/threads/lack-of-12v-outlets-and-needing-bed-cover.26978/#post-377739 -=FM45=-

Manny-- rear valance

@G07... those 'switches' shown are controlled by the CAN of the truck... the BCM does all the heavy stuff not the switch bank... they act like the keyboard of your computer - a pulse is sent to the BCM and then the command is processed ... -=FM45=-

All the info provided was for the 1500 DT -- give me a little to dig up info on the 2500 -=FM45=-

Great news--- glad all is well--- now onto the next mod ;) -=FM45=-

here-- https://5thgenrams.com/community/threads/colored-ambient-lighting-dash-and-doors.14274/page-5 -=FM45=-

Vin56--- just another thought... under Alfa, what is the 'Park Assist Tuning Set' value... that may need a change.. off hand it might need to be ' 10 Channel/BUX Rear Only/Summit' -- but don't hold me to it -- I think you're close... edit-- just did some more digging... before you change above...

... I should have said the sensors have the rubber rings from the factory... I have used this product on a half dozen Rams that I have added the front and rear sensors on.. again perfect match and no ill effects on their operation... -=FM45=-

@vin56-- just a heads up.. the sensors may come primed and ready to paint, just use some black TRIM paint--light coats for a perfect match, also the rubber Decoupler Rings come with the sensors; at least for the ones I recently ordered... -=FM45=-

Nice-- you will only need the harness, 2 sensors and the 2 rear valance pieces and you should be good to go... -=FM45=-

Def think that's the error issue... you also may have to add two pinned wires from the wiring block under your drivers seat to the module in the kick... you can check if you need them by looking at the grey plug at the module and see if all cavities are full... 68360453AD --- this is the rear...

@vin56--- How many sensors do you have in the rear - 4 or 6... with the new module and the new setting change - the BCM maybe looking for the two extra rear sensors -- just a thought -=FM45=-

Another option -- used them a half dozen times... https://www.mycartrim.com/ -=FM45=-

More Complete info--- MOD 100% tested and working https://5thgenrams.com/community/threads/adding-front-and-rear-parking-sensors.23200/ -=FM45=-

Quick how-to.... Enjoy :) -=FM45=-

As promised -- The Write-up .... Be gentle :) Hope nothing is missed-- -=FM45=-

--- that is a two piece plug.. slide the two sides apart and see what side is missing--you'll either need the male or female ends... re-pin your wires and you should be up and running -=FM45=-