Search results

I went the Alpine OEM way from the base 6... more info here--- https://5thgenrams.com/community/threads/modifying-the-base-6-to-the-alpine-9.34694/ -=FM45=-

Not sure it's as simple as cutting and splicing... that black box attached to the under side of the pass seat is the heated seat/wheel module... it is tied into the BCM thru the can-system. I can post what each plug does if that helps ya... -=FM45=-

I haven't actually dug into my wheel but the module that is used for heated seats is also used for the wheel... when doing the wiring for the seats, i would also add the wiring from the module to column.. you'll need a new wheel with heat, pins and plug, and then programming... -=FM45=-

Follow up for some part numbers and more info -- these are from a 2019 but I can't imagine much have changed up until present, but always check for compatibility... All OEM numbers-- Heater pads-- Seat 68309557AC qty. 2 Back 68309556AB qty. 2 Seat wiring--...

I think I did a write-up on adding Auto Climate as well as another for adding the Heated Seats... Let me see what I can dig up.. search my sig for my posts, you should find something useful.. I will also search my server once I get back home... FYI -- I would purchase the oem seat pads,backs...

OEM heated seats/wheel can be installed... don't think you'll find any dealer that will be willing to take on the task. You need the heat module, pads for front seats, new radio shroud that includes the seat/wheel buttons, wiring/connectors and programming... Got mine done except for the wheel...

@ UJim... not sure if you tried this way or not... with the radio pulled, slide the tube from the left to the right and have the top glove opened and with your other hand guide the tube into position... when it's in place there is a stop far right and it won't go any further... if I remember the...

@ Csjumper... that menu may show up on the radio.. I think that's were you're going find the settings... I think at least ;) -=FM45=-

Got some part numbers for ya... All OEM.. on your look-up .. numbers maybe be slightly different due to revision numbers.. Heated Seats/Wheel Module 68433906AC Heated pads seats/backs - 2 needed ea 68309557AC / 68309556AB Seat wiring 68377532AB 68377531AC 68360516AD 68360527AD ...

I added OEM heated seats to my ride... they were NOT pre-wired from factory... Now I am not saying yours isn't but mine wasn't, so before digging in check under both seats and locate the large yellow plugs... find the part number tags and do your research. Remember you also need the heat module...

I know you guys are all checking the obvious but don't overlook the handle caps... make sure the small magnets are present... I have seen the proper part number but had them missing... -=FM45=-

@ buckeye2019 ... if you got the 8.4 w/out NAV, the Aux switches may not populate on the radio. I added the 3 setting changes thru Alfa to a customers Ram 2 days ago and no changes as of this a.m. Still testing, but it doesn't look hopeful for the non nav. It definitely would make a great...

Done and works--- it's not plug and play, but it's doo-able... https://5thgenrams.com/community/threads/modifying-the-base-6-to-the-alpine-9.34694/ -=FM45=-

here is my install.. https://5thgenrams.com/community/attachments/ram-12-volt-plus-pdf.56456/ -=FM45=-

Here--- https://5thgenrams.com/community/attachments/ram-12-volt-plus-pdf.56456/ Mine is constant 12v thru a circuit breaker -- but you get the idea of what can be done--- -=FM45=-

Nice Job Trav... after the settings change you do loose the full range of the front doors.. again, only the dash and sub gets amplified. When you are shopping for the rear sub, you got to use the Alpine ver... triple coil. Once you add it, the system does wake up a bit... Like you stated, it...

here is another option--- https://www.mycartrim.com/years/2019/ram/1500-(crew-cab)/venom-s-body-side-moldings-2019-ram-1500-crew-cab -=FM45=-

@T --- You got Black interior... You can use the Indigo, it's close in color -- For the cost of these things, I personally would go with the exact color-- -=FM45=-

RePost--- Ambient Dash how-to... -=FM45=-

--- I believe there is only 3 oem colors, Beige, Indigo and or Black.. check your window sticker or your build sheet thru your Vin... this piece is needed for the center channel ... -=FM45=-