Search results

Hood rally stripes and front emblem overlay in grill. Body Pinstripe, Rocker Panels, Flags on doors and fuel door. Flag on rear sliding window, overlay on 4x4, rally stripes on tailgate, Patriot Shield. Tonneau Cover Flag.

You can still add a distribution center to either battery. The reason for doing this was to take the load off the primary battery, for accessories such as dashcams, refrigerator coolers, and other accessories that you might need to power while the engine is off and do not want to drain the...

Here is the parts list: REDARC Smart Start Battery Isolator & Wiring Kit 12V Part # SBI12KIT Bolt-Hex Flange Head Part # CH6104378AA Bracket - Battery Part # CH68082538AB Insulated Battery Shield Part # CH56029822AD Battery Tray Part # CH68350658AC 12V 750AMP Flooded Battery Part#...

I took the front beauty cover off and strapped it to the frame above the radiator.

There is definitely a learning curve. :confused:

Looking Good... (y) 😎

Sure, I used these two ground connectors on the passenger side of the truck closest to the cab of the truck. The one on the left is going to the spare /auxiliary battery. The one on the right going to the Redarc Isolator.

You have to purchase an aftermarket grill to accomplish this. https://www.ebay.com/itm/For-2019-2021-Dodge-Ram-1500-TRX-Style-LED-Honeycomb-Front-Upper-Hood-Grille-/255060785450?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0 Here is a post of trucks that have installed...

My DRL's had an inline 15 Amp fuse. That is the reason that I used the F60 Fuse tap, you can step down from 20 Amp to 15 Amp but you cannot step up the amperage F35 is putting out 10 Amp and F37 is putting out 5 Amp so your DRL's might be dimmer or flicker if they require more amperage.

I used the F60 fuse. This fuse works with the ignition switch. Most of the fuses have power all of the time. The F60 Fuse : ECM / PCM / ACT Short Running Valve. Since this is a critical fuse I decided to use a fuse tap so that the tap was clean. Our trucks use the Micro 2 Fuse You can pick one...

Looks Sharp.. (y) 😎

The front end of this truck looks similar to the front end of a Ford Ranger. No a fan. (n)

The blinker function is pretty cool. The wide vehicle LED look like someone places Cheetos on your hood. 🟧 🔶 🟧

I placed mine in a zip lock bag and it has been working great.

I had the same issue hauling a Travel Trailer with my truck. I switched to an E rated tire as you have already suggested that makes a big difference, the next step that I took was to install a set of Timbren Suspension Enhancement System (DR1500DQ) which fixed the sagging issues. The final step...

I wonder where they source the cast-iron for the Mopar Manifolds. Does anybody know where they are produced? :unsure::unsure: Like most things nowadays they are probably manufactured by a third party for Mopar.

The DRL lights are a LED strip that are run from a circuit board. You will probably have to replace the headlight since the headlights are sealed to fix this.

BedRug liners are a closed cell construction, which will not absorb moisture.

That turned out great. (y) I can't wait to see it on the truck. 😎