Search results

To clarity, I need to run a new wire from Assembly-Power Distribution Center-Interior Pin 31 to XY331A Pin 3 (female side). Then run the wire from Module-Park Assit C1 Pin 1 to XY331A Pin 3 (male side). ? Seems it would be just as easy to splice, as FM45 said--but I want to keep everything...

Trying to confirm which switch I need. Aparantly, I can't buy only the P OFF switches and add them to my existing panel? I already have Trailer Brake and Trailer Steer. (1st pic). Is 68447098AB (2nd pic) the part I need? Then I can just add my existing switches to this panel? Just curious...

OK, thanks.

I guess the designers really do get paid by the part number.

Yes, I found these magnetic buttons on Amazon.

Just to summarize; for the Left, Driver, it's: Mirror-Auto Dim Pin 1 BK/GY to Module-Door-Driver C2 Pin 5 " 2 BK/GN to " Pin 7 and Lamp-Blind Spot Indicator Pin 1 BK/WT to Module-Door-Driver C1 Pin 7 "...

I'm trying to build the 3 harnesses (without using the kit). Did you find PNs for just the connectors and pins?

Did you buy and modify the harnesses (as I think FM45 did?); or did you build them from scratch. If scratch, do you have the PNs for the 3 connectors, and the pins for each? Thanks, Brent

Maybe it will be more clear when I receive the mirror glass; but is the black connector you're holding already connected to the mirror? Maybe it will become clear when I receive the mirrors with the BSM; but is the black connector you're holding already connected to the mirror--or did you have...

I just got the Stop/start message today. I see several posts about 12V battery. Don't know how that could be related. My Stop/Start uses the 48V battery. Do Rams without eTorque have Stop/Start? Interesting that I get the normal messages; Engine temperature too low, etc.; then Stop/Start...

Here's the wiring diagram for the rears

I had to build the harness for XY430 and XY435; the truck side connectors that the rear seat harnesses plug into. Think I posted a diagram of that harness; but I don't see it now. I have extra connectors and pins to build the harness if you do the project.. Adding heat/cool to rear Laramie seats

Confusing that there are multiple threads on this topic. This should get you started. Adding Heated Seats

Thanks.

I've found set of damaged 2500 (4th Gen) taillights. They have the radar module and the mounting bracket. Thinking about transplanting the radar and mounting brackets to 5th gen taillights (listed as w/o module). I've checked and the PNs are different between 4th and 5th. But, does anyone...

I got my seats from Butler. That's a better price than I paid for mine; but mine did include the jump seat/center console. I also bought the Cabin and IP harnesses from the donor truck. I wouldn't have been able to make the seats work in my truck without having those harnesses. I wrote a...

I did. I posted the results earlier. It was a bad switch. Everything works like it should after replacing the switch.

Nice write up. Lots of help. How much did you pay for the mirrors. I'm seeing around $250 each. Many sellers have 094 and 095 listed formuch less; but when I look closely; they're not dimming--just BSM and heated.

If you decide to do heat only, I have this center stack for sale. It would allow heated seats and steering wheel. 8" Ram Center Stack Climate Control | Part no. 68340286AC and 68340286AD | eBay

I posted, maybe on a different thread, a lot of information on the wiring I had to do. You could add the heat pads to your cloth seats. You would also need the control module, would need to swap your center stack--if you want the hard buttons., and add several wires. But vented is more...