Search results

I am on the factory air ride, the pictures are in "normal" mode which I ride around at. Below are my components: "Daystar 2.5” leveling pucks, rough country link arm relocation brackets, homemade air links in front. Homemade air links in rear. Total lift is 3.5” in front and 2” in rear." I...

Daystar 2.5” leveling pucks, rough country link arm relocation brackets, homemade air links in front. Homemade air links in rear. Total lift is 3.5” in front and 2” in rear. Wheels are 22x12s with AMP 33 12.50s and 2” wheel spacers Sent from my iPhone using Tapatalk

Got the wheels on yesterday Sent from my iPhone using Tapatalk

measure fender to ground on level ground, put the truck in tire jack mode, pop off old links, pop on new ones, take off tire jack mode, measure your fender to ground, and your good. if you want more/less you will need to go back to tire jack mode, pop the links off, adjust and reinstall.

@NewRam92 to each there own. i made my own, they are full stainless with the plastic ends, total cost me 20 bucks for the whole truck versus i think $250 for the Revel links. good luck sir.

just make your own. M6 threaded rod with ends from Lift Support Depot very cheap.

2021 Limited with air ride. Daystar spacers in front with Rough Country link brackets, and shortened links. Rear is lengthened links. Total is 3” in front and 1.5” in rear. Rides a bit more “truck like” now but not bad Sent from my iPhone using Tapatalk

I have a Night Edition and the mirrors and grill are painted in Black Crystal Metallic (color of my 2019 Laramie), so you should just be able to get a color matched Limited grill. As for the sport hood, its the same as a standard sport hood on any trim level.

I had 22x12 -57 Vision Slivers on my 19 Laramie with 2" wheel spacers, with a 2.5 level. I will be doing the same with my 21 Limited

Gettin rough in here. Everybody out to spend someone else's money. Just enjoy the community!

Another one.....

you would have to change the whole dash to even add the HUD to it.

I have mine set to the lowest setting on the windshield, i am 6'1", but i tend to lean to the right when i drive so its "dim" since i am not centered in the set and you cannot move the HUD left to right

This picture is 22x12 -57 offset I then added 2" spacers

curious if they thought that was going to end well?

Do Corvette (especially ZR1) owners care about gas mileage?

I get 13ish on my Trackhawk, so I sorta surprised this is that "good". haha

2021 Limited Night Edition Wheels from my 2019 Laramie going on this one in the spring

@Gulls61 If that's what you need, then yes. part numbers below:

i have these as well. they fit and feel great on my 2021. ive had the OEM mopar ones in my 2019 and they were fine, and weathertechs in my Jeep. i perfer the huskys