Search results

dang... should of researched before i spent money, i bought a ch42 harness to use my ch41 pacpro from my 19 ram thinking it might work and well it doesnt like op said, it flickers green power when first powered but thats all she will do. sadly i need mine for a dsp install not just a sub install...

Removed the trim badge and replaced with an SST badge. Not sure i picked the right font but still enjoy it more than the trim badge

hmm, i am happy to test it and find out, just would need to know of the correct part number and a place that would accept it as a return if it doesnt work. i see all these as part numbers for the cluster: 68610858AG 68610860AG 68610856AG 68610861AG edit: nvm found a site that gave a bit more...

i was reading and the previous rams appear didnt need much to get the digital cluster working, is the 25 the same? i know the 25 doesnt have alfaobd yet but it kinda looks like alfa wasnt even needed in the case of the previous trucks minus setting up the bcm swap?

got it working. it was indeed just an update. my uconnect was stuck on 31.42. i couldnt get it to update, tried uconnects site and it said my truck was updated already, i tried restarting the radio with no luck. a reset of the radio was able to trigger the update notification for 35.26. 35.26...

Hmm interesting i have this same issue. was searching around to see if others had this issue and if there was a fix. the only things that reliably show on the display is the speed, lane assist, and gear. things like gps directions and speed limits dont show. i can sometimes get it to show if i...

nah, figured they wouldnt give one as im sure thats something they wont be able to without seeing it in person.

figured i would update. i sent an email to md and got a response for my build and indeed md beat my local dealer by just slightly more than 4000. i then went to see my dealer in person thinking if i went in person they would be more likely to deal, but they just sat there saying there was no way...

yea i know i could probably get it less from mark but then i wouldnt be able to do a trade in for my current truck since im in colorado and dont think i want to drive that far. i might ask them when i go in about getting it a bit lower. I thought about selling the truck and just dealing with...

can someone tell me if they think now is a decent time to order a new ram 1500 with current rebates/offers? im about to go down to the local dealer tomorrow and talk to them just didnt know if the current offers are any good. here is the order sheet they sent me with the total price without the...

the problem im facing is you cant but the amp too low or too high as the back of the seat hits the amp. so i only can use like the center of the amp rack. and right now i got a sundown 2000.1 along with 2 taramps 4 channel amps which the 2 taramps already barely fit so not sure how i am to...

as the title says is it safe for me to do so? as in it wont set a warning light or mess with anything else? i want to do this so i can place my 8 channel amp under the driver seat as my sub amp pretty much takes all the room up behind the seat(only can use the passenger side behind seat due to...

does it really matter what the donor vehicle is for the bcm? ie can it be from a classic model as long as its 2021+?

Finally got my 360 cam installed. worked first try without having to even calibrate camera(though not sure if I should try calibrating it anyways?). i got very lucky with my install and found the cvpm for very cheap used on ebay, it was with the part number 68318033AC for 80$ i figured if it...

that thread is actually the main thread i read when deciding what i needed. which was correct that i just needed the remote. though your response in it was 8 hours of wait time and that definitely wasnt enough for mine. the time it was for me appears to have been much longer OR it was unplugging...

I did. Before doing that the fob did nothing when you tried the remote start button. But now it honks when you try it. And I seen where someone said you might need to wait awhile but it's been like 16 hours so far and at first the battery was pulled for an hour too since I just installed passive...

So from the posts I been reading people say to check if you have the wiring under the hood going to the latch, I have that wiring and latch already so I just got a fobik programmed with remote start and tailgate release. The tailgate works but the remote start just causes the truck to honk How...

for the 19/20 trucks since its the BCM thats the issue and there is already a workaround for the BCM to get the digital mirror working by adding a "slave" BCM somewhere in the truck. would it be possible to utilize that same BCM to enable the switches? I mean sure the actual config wont work...

oh heck yea, and they dont look half bad either. thank you.

i just purchased a 2020 bighorn DT on saturday with the standard halogen reflector headlights. i have made a few purchases for some additions i want added(passive unlock, RC running boards, remote start kit). well i want to go ahead and also order a set of better headlights but do not want led...