Search results

I thought about using thinner or paint remover but the overspray is on really thick. Like 3 or more layers of primer and paint. On some of my bolts I could barely see the thread lol. I used dremel with wire brush wheel. Lots of good options to remove the paint. I cross-threaded the first...

My bolt pattern is the same as the Laramie you took a pic of. First time I’ve heard they used a different pattern.

Did you check with Clay Robbins or Ziegler? They are usually several hundreds less than Chrysler warrantys.

Yes max height is 2" over stock with or without OR packsge. When you hit 25 mph it automatically drops to OR1 and at 45 mph it goes to normal height. So these settings on air ride are not designed to be a permanent lift. Plus ride is much stiffer. You can trick the system with adjustable...

This is one of the videos that claims 35s fit, but they actually moved the front bumper out 1/2" lol.

Yes the air ride on the off road package is a different system with larger components and compressor for the extra 1” lift. This is why the air ride settings on off road package only has entry/exit, aero, normal and off-road. So the off road setting is 2” higher than stock height on non-air...

Did the stock truck on 35s with air ride have the off-road package? That adds 1” of lift. Not many options available lift wise for air ride that would keep the factory ride. If you want more lift then you could wait for BDS to come out with their 4” kit for air ride. But max lift is 2” for...

No they stick on with 3m tape so you can just flip them up for towing but there will be some chrome showing on the part not covered when laying horizontal.

Mine worked perfectly. Just swapped out my rims yesterday.

Larger rear cabin and flat rear floor.

I drove both as well with same setup except for air ride and felt air ride was much smoother. So it was a must have for me. I also purchased Mopar lifetime maximum care warranty for added protection. Ride feel is very subjective. So everyone will have different opinions which is why it's...

I believe those are Mopar/FCA numbers so may have to contact a dealer. Try Josh at Avondaleautomotive on eBay. Good luck!

Hopefully this is what you need. Part numbers listed.

I'm down for 295 but need a lift LOL.

Here you go!

Oh, returning the favor my friend. Lol!

Oh what a nice surprise. Go to 6:50 https://m.facebook.com/story.php?story_fbid=2162601000619200&id=264148950996

Finally got my Rebel rims swapped over. Just need lift and new tires lol.

LOL but someone will buy it haha.

They also have a 2wd with 4” cst lift. Measures 41.5” at the bottom of fender at center of front wheel on 34” tires.