Search results

Yeah, the issue is that our LED tail lights do not send the turn signal on the same wire as the brake signal (like it does in the trailer harness or most halogen style tail lights). So, in order to use the both signals directly from the tail lights, you have to get the signal from both the turn...

Compared to the out-of-sync look that you see when using the signal in the trailer harness, it's "nearly" eliminated...that's the delay I was referring to. Here are videos of other members who have the delay that I'm talking about: As for the initial delay on the first blink, it doesn't...

I was in the same boat as you! lol 34's are definitely the way to go but I wasn't sure on the width or even the brand. I was torn between these, the Nitto's or the new Toyo's. I went with 295 to get a slightly wider tire, but it also came down to what was available at that time. The new...

Not too bad. I started by reading this thread on Lightbar installs to help me plan ahead: https://5thgenrams.com/community/threads/tailgate-light-bar.3298/ The hardware is easy to install after that (with the nylon spacers and the trailer wiring harness that is mentioned a lot in the latter...

Thanks! It's a 25' trailer (29' when you include the tongue) with a dry weight of over 5,822lbs and I do have a WDH/swaybar combo system...it's a must for a trailer that long with a 1/2 ton! I do have the stock (for Limiteds) airbag suspension which levels itself after the trailer is on the...

I can't believe I haven't posted in here yet cause I love this color! It's dark enough that it looks tough, doesn't show dirt as easily as darker colors do, and it can really pop when in direct sunlight when it's clean! Here's mine as we were heading back home over the Holidays (a 1400 mile...

Just installed my Christmas presents! The Putco 60" LED Lightbar and the LUYED LED backup lights:

Following up on my own question...and I'm happy to report that these Diode Dynamics "Tail as Turn" modules worked! I tapped into the turn signal and the brake light behind the LED tail lights and combined them with a TaT module (one for each tail light) so that a single wire with a combined...

Thanks for the write up! It's posts like these that always bring me back to forums like this.

Got one of these too and I love it. It did make for a tight fit when closing the tail gate with the Bakflip Revolver X4 tonneau, but the family really enjoys sitting in the bed of the truck now thanks to the BedRug.

I have a 2020 with a 11/19 build date and no issues. A few times during a good rain, I have run outside to check and have not seen any signs of leaking yet. I have changed out the CMHLS bulbs with LEDs, but did not do anything with the weather stripping. Also, I do have a single crack just...

It's a Coachmen Freedom Express (257BHS). It's 29' bunkhouse from end to end (including the hitch). We got it in October and have been very happy with it!

Merry Christmas! Took the trailer on a 650 mile trip south to GA to visit family. Along the way, we stopped in northern GA for a few days. Lots of hiking trails with beautiful sites in northern GA!

I went through the same problem with my tonneau and Bedrug XLT on my Limited. Ultimately you don't have to install that plastic strip. Initially, I installed it. I had to use a rubber mallet to get it over the spray-on bed lined part, but once I had it all installed, the gate would close...

Wow. Sorry to hear that but glad they took such quick care of you!

I have used an adaptor like this in the past for my 40oz Hydro Flask. It works, but it will make your bottle sit pretty high. Basically, the bottom of the bottle will be above the top of the stock cupholder opening. I'm not sure I would want to chance a full Hydro Flask sitting that high in...

I might be doing the same for my upcoming trip. Love everything about my truck except that 23 gal tank while towing the travel trailer. @mccague36, completely agree. I checked and I certainly have room for the full 33 gal tank (but no 3rd strap unfortunately). At least I have a decent...

You forgot your photo. I have 40oz Hydroflasks and I found they fit in the door pocket (after I take out the foam insert there).

For the door locks, do they not work at all? Meaning, they don't work when you press the lock or unlock buttons (either on the door or with the key fob)? What setting do you have it set to in the uConnect settings? For the trailer, does it not work for both plugs (4 or 7 pin)? Have you tested...

Haha, it should have said hood ornaments. Dang auto correct