Search results

I think I removed mine within the first week of ownership in December of 2020. No issues yet!

I had TRX Ignition Edition wheels on my truck with the stock Rebel tires. Today, I put a set of the TRX Launch Edition wheels and tires on the truck. They look good, but I do have rubbing at 3/4 turn, so I'll probably need to remove the front mudflaps and do some trimming. This pic was taken...

Caster shows 4-5.3 on my sheet and mine is currently running at 4.1. I have no rubbing on 275/70-18, but you're running a 1.5" taller tire, so that would eat up some of the space I still have remaining.

I've had this issue for the past year. It started after the dealership did an alignment after they replaced the driver side front axle. The dealership suggested that I wait until after the recall was fixed. I took mine in for the recall and it just so happens the light went off the day before...

You don't need to remove ALL of the mounts, but you will need to loosen them to allow the body lift needed on each side to remove/install.

Being a known issue, they should address that under "good will". You should ask them that.

What's a RAM Repel?

Well, you state I must have really low miles, but I stated my miles at 40k as of today. I turned 40,006 just coming home from dinner. Retail pricing is lower than private party but higher than trade in, so it's a fair pricing for reference. I just looked up on Cargurus what a '21 Rebel with...

I used Edmunds to get a price for my '21 Rebel. After selecting my options, it gave me a retail clean value of $41k. My truck is super clean, but that extra cleanliness really has no value to a dealer or the market. I then checked KBB and used clean again, rather than excellent. KBB said my...

https://www.ebay.com/itm/306159793764?fits=Submodel%3ALimited%7CMake%3ARam&_skw=ram+limited+console+slider&epid=2331606572&itmmeta=01JSKVY2F2BGX79H6XWM3APG04&hash=item47488bb664:g:s5sAAeSwN6dnyLNC&itmprp=enc%3AAQAKAAAA4FkggFvd1GGDu0w3yXCmi1enfkLPAZfbiyBfEoDWOiyHb7KSE%2BNKDeq62e5KmmcsPpsLr7latG%2B...

Taking a video won't do much. Here's why I say that. My wife has a '22 Audi. We've had a bunch of electrical issues that required service. I was sitting at a red light, no cars in front of me and the forward collision alert kept sounding and flashing on the dash. I was sitting still! This...

Why only 2025? My alignment was perfect before the dealership realigned it to spec. Then it pulled right slightly. For anyone that didn't read this entire thread, I got an alignment after installing the Bilstein 5100s and new UCAs.

I've heard that the Chevy and RAM 6 lug wheels are interchangeable. I haven't tried it, but that's what I heard.

Just looking for clarity here on what HSKR said. I have a Rebel 12 with level 2 package. There is no tailgate release button inside my truck and no tailgate release button on my fob. So, if I get a fob with the tailgate button and get it programmed to my truck, I can release my tailgate with...

How much would a body shop charge to fill the holes and repaint?

I hope Ford fixed the issue with the 10 speed trans. The programming they had in my '18 was so bad that I won a lemon law suit. The arbitrator said the truck was downright dangerous in traffic after I took him for a ride. He described how the truck performed to a Ford tech during arbitration...

Are you sure? I had a 2018 F150 with the Coyote. It was new and bone stock and that truck was slower than a friend's bone stock 2.7L F150. I was so disappointed in that 2018 that I got rid of it after 6 months. I bought the V8 because I wanted the sound and performance the V8 provides, and I...

It all depends on how the vehicle was stored for years. In 2023, I removed graphics from a 2013 Camaro that sat outside all day in the same parking spot. We get the sun beating on a car, then a quick rain, then the sun beating the car again. That Camaro was garage kept at night and always had...

Exactly the same. Loosen mounts on both sides, remove bolts on one side only and lift the body enough to pull out the top of the mount. One thing I did was after I replaced mine, I left the bolts somewhat loose and moved the truck to allow it to settle correctly without any binding. Then I...

It takes less than 30 minutes