Search results

You can also order a pre-made rca with the connectors from zautomotive—they make the tazer dt . It’s $25 but worth it if you don’t want the hassle of ordering all the parts and/or tools if you don't have crimpers. https://www.zautomotive.com/product/video-cable/

I just wish Tazer could make the camera come on when the front sensors activate. That would be awesome!

Finally got my front cam working once i seated those pin connectors correctly. It was definitely 21/22 for a 19 Rebel. Thanks for all the help!

I ordered one of those tools. It gets here on Saturday. My new pins arrive tomorrow. I’m going to try the pliers/heat shrink approach. If that doesn’t work I’ll have the crimp tool to finish the job this weekend. Just not looking forward to have to pull the radio a second time as I have to drive...

Unfortunately, those pins are shot. Crimping and solder is not a good combo. I ordered a dozen this time around to make sure I've got plenty. Think I'm going to crimp and use heat shrink. That should keep it nice and low profile so it fits down inside the hole.

Looks like I missed the part about prying the red face off the harness connector in order to get the pins far enough down (https://5thgenrams.com/community/threads/cargo-cam-input-car-pc-telemetry-project.18394/post-251332). Now I have to wait for my new pins to arrive on Friday before I can...

No luck getting this to work. I did figure out that I can use the Tazer for force a reboot of the radio which does bring back the missing functionality of the rear camera (if that's something that happens to you after disconnecting the radio). I've tried pins 21/22 and 24/25 but each time, I...

This is what I’ve got on the drivers side. I’m assuming you’re talking about that big rubber circle on the left? Behind it is a grommet but you can see that cable runs cleanly through. Did you just run the cable through one side of the grommet? I’m assuming you didn’t punch a hole next to the cable.

I must be missing something because I don’t see the grommet photo in your write up. I see the link to the thread that talks about the grommet under the driver side wheel well liner and I see the pic of your mounted camera. I’m sorry if I’m being dense here.

Did you completely pull the wheel well liner out or did you just wrestle it out of the way to get to the grommet?

A few more questions. What fuse box did you use? The one under the hood or under the steering wheel? Which fuse location for the actual wire? How did you route the cable after you pulled it through the hole by the brake pedal? Did you just route it up behind the steering wheel to the radio...

How long would you say it took you to mount the camera including the partial removal of the grill? I need my truck in the evenings so have to plan my time after work. I’d hate to get things taken apart under the hood and run out of time. I want to do this in two stages with the first being...

Just got my camera! Since it seems like just getting the camera installed at the bottom of the A is the most difficult part of the entire process I'm going to start on that tomorrow while I wait for the rest of the parts to arrive.

Everything is ordered. I’m going to do the install next weekend!

Thanks for the detailed write-up. That part from the mouser link—the connector for the ends of the RCA pigtails is out of stock. Were you able to find that same part anywhere else? What’s it called? Maybe I can find one locally?

Awesome! Thanks! Already have the tazer so just need to get the other parts. And all you had to do was pull the radio and run the camera wire? Anything overly challenging or any gotchas to be aware of?

Can you share your full parts list?

I know 35 won't fit but the 275/60 is supposed to be a 34" tire. Are you sure that won't fit?

I've got my mod shop ordering another 20" rim with that 275/60 tire. If it doesn't fit, at least they can take care of swapping tire sizes until we find the one that does fit. I think what I'm also going to do is just buy a plug kit and this, from Amazon along with keeping a good impact wrench...

Hi Everyone... I just added some 1.5" spacers to my truck to complete the look I wanted. Unfortunately, the spacers + the 35" tires don't exactly fit as nice as some people might claim they do. Without the spacers, I had to zip-tie my wheel well liners to avoid rubbing. And even then, in...