Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I would try to get some type of grease such as spark plug boot grease into the door catch mechanism. This will help in preventing water from freezing up the mechanism.
Sent from my GM1917 using Tapatalk
There just lying, plenty of Rebels with 26 and 33 gallon tanks. Also, unfortunately you only have 23 gallons. The extra 5 gallons on sticker is actually just 5 gallons of gas they shipped the truck with.
Sent from my GM1917 using Tapatalk
My opinion is the cover is probably fine and just a crappy install that wasn't done correctly the first time by a crappy dealer not standing behind there work.
Sent from my GM1917 using Tapatalk
Like this grill, too bad it doesn't fit on Rebel. I know this one is similar to rebel grill but still like it a little more.
Sent from my GM1917 using Tapatalk
I think you will need to try but there must be some difference since they have different part#'s. Engine the same so I'm thinking it may have something to do with height or the front where it wraps over the radiator . Looking at pics side by side it doesn't show anything obvious but most likely...
Yep, stupid *** design in my opinion. Why not disable the front sensors in reverse. I guess the side front sensors could help when backing up and turning and you get close to something on the side.
Sent from my GM1917 using Tapatalk
Just checked 5th gen, mirrors folded in is 83" (give or take an inch, hard to get exact by your self), folded out is 97".
Sent from my GM1917 using Tapatalk
Looking at pics of the ram bar it sits higher than center lamp so it shouldn't interfere with lamp. Possibility of camera catching a little bit of ram bar depending on angle of camera but the camera is designed to go straight out(replicate rear view mirror) so I think you'll be good.
Looking at...
I read post last week or so with the same complaint from an owner of GT that they thought the exhaust would be louder.
Sent from my GM1917 using Tapatalk
What's in place of the key tumbler?
The key tumbler is usually held in place with a hex set screw on the side of the handle, perhaps try to remove the set screw and remove what's in place of the tumbler. Perhaps it's causing the handle to lock. Just a guess[emoji848][emoji848][emoji848]
Sent...
Are you sure the headlights were on Or just the led strips?
I guess the strips are part of the part of the headlights but those are always on even if the headlight is in off position and the truck is on.
Sent from my GM1917 using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.