Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
When I put them on and was dialing in the speedometer I did just this. The driver's side rear tire, with the weight of the truck on it, was exactly 34" from the ground to a level placed across the tread.
They weren’t able to find anything since it wouldn’t do it for them. Since the PCM update it hasn’t stalled on me, but there have been a couple times where it’s stumbled when I slowed almost to a stop then pressed the gas, always first thing in the morning. Could just be the terrible lag in the...
All 4 handles are the same as far as fitment goes, but the ones for PE have the required wiring. The caps for PE have magnets in them and are required for the front.
Here's the part number for the Garnet color (without chrome) that support PE. Double check them on your own to be sure. You could...
As long as your parking brake releases you can drive with the codes, I did. Your dash will just be lit up until you can get it cleared.
Sent from my iPhone using Tapatalk
Yes, the bottom of each screen displayed GPS coordinates along with current altitude which I liked since it's a pita to get to the gps data on the regular 8.4 nav screen.
There was an update that my '21 Laramie received a few weeks ago that made the off-road pages display on the 8.4 nav screen. It was odd as there were 2 icons for it that were the same. After about 5 days as I was driving to work and had one of them displayed (gauge cluster), the screen went...
No issues noticed here with the tires in my signature which are a good bit heavier than stock. Still notice it while slowing down, and it still gets the truck moving after the auto start/stop.
When they worked it showed all 3 pages on the uconnect and all data was displayed. I'll hook up to it later and see what those settings are at. It's just odd that the pages showed up after the update and then decided to go away today while driving.
You exceeded the maximum size for park sense on your truck. It seems to be a little different for each specific truck. When I did mine I found that anything over 2710mm caused an error. I stepped it down a little at a time and ended up around 2670 for my speed to be dead on and park sense has no...
Wondering if anyone else received an update to the 8.4 Nav recently that added the Offroad Pages. I got prompted last week that an update was available so I let it run hoping it would fix my phone favorites not syncing, which it didn't, and it added 2 identical icons for the offroad pages. They...
Any dealer can use your VIN and look up the factory equipped parts in Star Parts. That will tell you exactly what part number you have. You can then use a VIN that is known to have the advanced safety group and compare the part numbers.
Sent from my iPhone using Tapatalk
I imagine a large part of it is due to liability. They don’t want to be responsible if something were to go wrong due to them taking a functioning system and replacing it with one that was not originally equipped and not a standard Mopar accessory kit.
They might be able to actually install...
@Jimmy07 probably does. If he doesn’t chime in eventually I can look back through all the stuff from when I did the write up and see if the full diagrams are there.
Sent from my iPhone using Tapatalk
Very nice and well laid out setup.
You can add lights off that circuit fairly easily. I added a 60" LED strip up under each bed rail and mounted a switch in the plug where the factory lights would go. I used a SPDT switch and pulled power from the 12V lead in the trailer harness to one side...
This link will give you some info based on your specific VIN: Towing Lookup by VIN
Keep in mind that anything you have added to the vehicle, yourself included, will take away from those numbers.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.