Search results

I spoke with Jimmy07 about this a while back and pulled the pins from the connectors to get the measurements. Last I heard, info on the rear door to body connectors is shrouded in secrecy as happens sometimes with manufacturers. Easiest route to take is to run wires from the handles and then...

I only had the stock tires for about 900 miles, but you’ll definitely notice a difference in the firmness. I drove on LT tires for over 10 years with my Titan, so to me it feels normal. I usually average between 15-17 mixed driving if I take it easy. On the highway it’s really dependent upon...

I hardly even notice it and that’s where most of my driving is. I can hear it if I listen, but it doesn’t drone and isn’t any louder than my tires. Sent from my iPhone using Tapatalk

If you're using the android version, I believe it defaults to the one that it senses for your vehicle, regardless of which you select. If you have the windows version you can connect using a different one in the advanced options.

If you do the abs initialization and sensor calibration it should restore parksense if the tire size is back to factory. Sent from my iPhone using Tapatalk

May have to hold it longer, I know I have done it on mine a few times. Maybe it's different on the 12" screen, mine has the 8.4" in it.

If you hold down the power and tune knobs for about 10 seconds it should do a soft reboot of the system.

That's strange. Perhaps it's something new on the 22's. The 3 honks is how fobiksafe responds when a fob is left in the truck and you attempt to lock it, but I wonder if they added this in addition to the interior chiming, or if there is a bug with something. One way to see if it is fobiksafe...

3 honks is the response the fobiksafe system will give letting you know there is a fob in the vehicle if you try to lock it. It should also unlock the doors when it honks. Not sure if that's why you are getting the honks, but you don't by chance have the spare fob inside somewhere do you? Is it...

Thanks for providing this. I updated the original parts listing in post #7 with it.

Thanks for following up on it. I’ll probably reach out soon for some harnesses for the rear and just pull the wires through and tap into the trigger wires as you said. It’s not like I’m taking my doors off all the time and would really need the ability to unplug the harness. Sent from my...

I was going to add it to the write up once I got it accomplished. @Jimmy07 were you ever able to track down the terminal pins for this? It’s still on my to-do list as well. Sent from my iPhone using Tapatalk

I’m in the same boat as all my other stuff is Apple now. I originally went with a cheap android tablet, but then the newer updates to AlfaOBD wouldn’t work on it. I ended up getting a cheap windows tablet online and so far it has worked just fine and the windows version has more control than the...

Left should be the driver’s side and has the key hole. You need to swap the internals from yours into the new one. The remaining 3 caps on the truck are all the same since they don’t have the hole and come ready to install. Sent from my iPhone using Tapatalk

Beat my post by 8 seconds [emoji1787] Sent from my iPhone using Tapatalk

They’re like $8 (probably a few bucks more now) if you use the one in the post that has the parts list. If you actually look up the one that comes from the factory in that position they’re crazy expensive, but the $8 one works the same. Sent from my iPhone using Tapatalk

The rear doors are the same process, the hole is just hidden behind the weather stripping straight back from the handle/cap. Sent from my iPhone using Tapatalk

Removal of just the door handles/caps does not require removal of anything on the interior. It’s all done via the screw behind the small plug on the striker side of the door. You can install PE on just the drivers door and it will function, however you will have a fault in the fobiksafe system...

If I recall, he did it via the sales code addition to his VIN, before I put together the write up about using AlfaOBD to do it. For the caps and handles, you are looking at around $200 +/- and if you need the program, OBD interface, and security bypass you’re probably looking at another...

Click the link in my signature, it'll take you to the how-to that covers it all.