Search results

So, does this mean the physical BCM does not support the cargo camera? I wonder what determines what BCM you get. I figured they'd all be the same.

Not sure if it's much help but I upgraded from a non nav to 12" and i was able to enable the soft key.

There are only a few reasons this wouldn’t work. Need to be 100% certain the camera itself is wired properly and is working. Test on a TV before hand. Once you know for a fact it’s not a power or ground problem then you can move on to the pins in the connector. If it doesn’t work then the...

I've though about that. I think this would be a good option... I bet you could add a switch to one of those wires to make it work...

Not on hand. I'll take one later. I also plan on doing a complete write up on the procedure once I confirm it's working. It's not an "easy" modification i'd say and certainly not the cheapest but it's certainly doable.

So i have made some major progress on this. I managed to find a New DASM on ebay for half the price of retail. After a long wait it finally got here today. I swapped it with my current (used) one and fired the truck up. For the first time in literal months there were 0 warnings on my dash. I...

Technically it does... but there are work arounds. All the new windshield does is give the camera a place to mount to and look out of. You can make a DIY mount that would allow your existing windshield to work. This is what i did.

Interesting. So you can't have an analog cargo camera and analog aux trailer cam at the same time. That makes sense - the CHMSL Camera on the 2020 2500 is listed as digital. I may see if i can get the trailer camera to come up. I guess it would give me two softkeys since there are 2 inputs in a...

Ah that makes sense. so is there a way to enable another Auxiliary Camera? I see that under the 2020 2500s there’s an option for Off Road Camera and trailer camera under vehconfig 8.

Can anyone confirm if enabling “trailer hitch camera present” enables another analog camera input on the radio?

There is lots of good information on this site. If you want to dive into alphaobd, which is pretty much essential for any DIY project on your truck, head over to the alphaobd thread. It's long, but you need to have a good grasp on what it is and how it works before you jump in head-first. It's a...

For those of you that want a cargo camera rather than a front facing like I did... I made my own third brake light camera. It’s not too bad of an undertaking. Camera aims a little higher than I want due to the angle the light mounts but it’s not bad. I actually ordered a different camera so I...

Has anyone had trouble getting the rear USB’s to work? I have all the other ones working (including the one on the inside of the console) but the rears will not power up.

Thank you. I was able to get travel link working after enabling too. I don’t really need the WiFi or cellular to work at the moment but I want the option and I’d like to have the DTCs cleared that are a result of the missing antennas. Do I need 1, 2, or 3 of the antennas?

Could you send links to what you bought? Was it obvious where these plugged into?

Okay so I was able to find a DASM module on eBay that is claimed to be new and unopened that was half off the price of one from a dealer. We’ll see if that is the magic piece missing to get this working. I will update once I get it and install.

The camera in the grill is not a part of the lane keep assist or the ACC. As far as i know it is only for surround view. The Module i added behind the rear view mirror is the DASM which is a Radar and Camera unit combined that does in fact control Auto high beams. I did enable this feature in...

Got it. No errors in parking. Here is my BCM as it sits right now: https://drive.google.com/file/d/1dU1tR8K9SNimxTeMpmNM5inoyU99dl95/view?usp=sharing

I’ll make the changes now. I should also note I changed some PTS options to semi-automatic as well.

If there’s a will there’s a way...