Search results

You’ll love it. The fabric dries pretty quickly too. Got up into the 50s Saturday here in Philly and I washed the truck and top. Easy to clean and was dry in under 30 minutes after wiping it off with a microfiber towel. I think the matte looks a lot better than the vinyl shiny look. ‘21 1500...

Do you know how they fixed it - was it adjusted or replaced? One of mine is warped now on my 2 month old truck with 1,000 miles. ‘21 1500 Ltd, Max Steel / Indigo Frost

Added a bedrug. I’ll let it settle a bit before I install the Velcro strips. So far I like it and was surprised by how light it is. It’s the 4th gen Rambox size buts fits perfectly for 5th gen. ‘21 1500 Ltd, Max Steel / Indigo Frost

There’s a thread on here that shows the last gen Rambox bed rug fitting the 5th gen. I’ve been thinking about getting one but haven’t yet. I was looking for a rubber one but can’t find one that fits either. ‘21 1500 Ltd, Max Steel / Indigo Frost

If you like the LoPro check out the Prox15 too by Truxedo. Essentially the same cover but has a fabric convertible style top that is matte vs. the shiny vinyl look. Quickly bolts onto the silver rail and can be removed in probably under a minute. Works great with Rambox, mft and bed utility...

My Truxedo Pro15 came with a strip to add on top of the bulk head to seal underneath of the edge of the cover (which had another seal). Are you looking at a specific cover? ‘21 1500 Ltd, Max Steel / Indigo Frost

I wasn’t looking for it but the truck I ended up getting had it and I’m glad it did. I really don’t ever lower the tailgate anymore. Much easier to reach in and get in the cab with the split doors. I have the bed utility group too which makes the step shift to rear. Very easy to get up in the bed.

The edge of the moveable tie down hooks (curved part) actually stick out a tiny bit past the cover rail which bolts on top. I like the way it attaches without big c clamps. Looks cleaner. The Ramboxes open fine but they are a little stiffer since the rubber seals are pushed up against them...

Not much. Maybe 1” beyond existing bed rails. ‘21 1500 Ltd, Max Steel / Indigo Frost

I can take a pic tomorrow. It’s been a snowy week here in NE and need to pull out of the garage. My wrangler w/ lift & 35” ridge grapplers is my snow vehicle. ‘21 1500 Ltd, Max Steel / Indigo Frost

The tonneau cover included two pieces of rubber that I used. They are about 1”x1”x3”. At first I though I didn’t install them exactly even but then realized the right side of my tailgate is lower than the left by about 1/4”. ‘21 1500 Ltd, Max Steel / Indigo Frost

I have a 4 YO son who likes to touch, hit, kick and jump on just about everything... Cheap insurance but I would buy it again just for the resistance to fingerprints.

I have 900 miles on my limited after few weeks. 3.92 w/ etorque. Averaging 14 overall w/ half those miles on two different 200 mile highway trips where I averaged 16-18 based on speed. Like others have said difference for me between 70 vs 80 on highway is almost 2 mpg. I’ve filled up twice both...

I was really surprised at this. Added a $13 glass one off Amazon a few weeks ago and not only does it not show finger prints like the stock unit it’s barely visible and seems smoother to the touch. Win all around. ‘21 1500 Ltd, Max Steel / Indigo Frost

My garage is 251” from rear wall to garage door. I thought it would be too tight to be practical but it’s been fine actually. I put foam on the back wall and I can easily back in to within 1” of the wall with the rear camera which clearly zooms in on the bumper. There is about 16” between the...

+1 although I have ramboxes so didn’t need to modify anything to install. Seals best when cover is closed after tailgate is closed but you can still open and close the tailgate w/o Unlatching to top. You can remove the whole thing in under a one min if desired. ‘21 1500 Ltd, Max Steel /...

Ha. That’s my good side. The passenger box is actually a little warped in the corners. Total fail on Rams part not making these things more rigid. I’m going to see if it gets worse and bring it up later this year if so with dealer. I was prepared for it going in though so doesn’t bother me...

Finally got around to clean slate wash, clay, wipe out surface prep and ceramic outside. Truck is only two weeks old and paint was in great shape so skipped correction. Tried the highly recommended Turtle wax ceramic spray this time and turned out great. Two coats with 24 hours to dry between in...

I recently installed a Truxedo Pro X15 and I am pleased with it. I was really just looking for some weather protection if we put bags or tools back there but wanted a sleek and easy to remove or roll up cover. Almost went with the sentry model but thought I would try this first. Easy install and...

Once you figure it out you can probably unplug or plug it back in a matter of minutes. I tried it with mine unplugged for a few days but ended up plugging back in. I mostly listen to country and usually on Apple Music which seems to be the best balanced source I have tested. I can’t stand DJs...