Search results

I bought the jumper from Jimmy on here. I never verified he pinned it right but I'm sure he did. He sells quite a few and seems very knowledgeable. Also I'd think if it was wrong the screen would always be black. When I cut power it comes on normally but goes off after 30 minutes or so and...

Ok so I waited 45 minutes since the last time I pulled the battery. This time it came on like it was supposed to but says the rear backup camera isn't available. I think that is normal and takes time to come back. Usually at this point it won't power on and when it does, I don't have any of the...

Back for more help. I installed the required things back a couple months ago and could never get the screen to power up without pulling the fuse or the neg battery terminal. I pulled the whole thing out and put the 8” back. Well today I decided to try again since the truck has been to the dealer...

Yeah I used OBD JScan for iOS to change the settings.

Well since I tried everything and still can't get the screen to power on without pulling the fuse I took it all out and put the 8.4" back in. It is very disappointing but I confirmed the settings and changed the settings back and forth a ton of times and it just wouldn't work even when the...

The module to control the screen was $660 shipped https://www.moparfactoryparts.com/oem-parts/mopar-multi-media-radio-68317978al The LVDS cable was $30 shipped https://www.ebay.com/itm/184946900398?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 The Bluetooth OBD tool was $60...

Mine has sat for days and I've confirmed the settings are correct and I still can't get it to work. I'm pulling all mine back out and putting the 8.4 back in. I'm tired of pulling fuses and checking it and it still not working. I must just put it all up for sale.

I reverted all the BCM settings back to what would be factory for me truck.

Yeah. I double checked the part number and other people on here have the same one and it works for them. I just don’t get it.

I reverted all the settings back to factory for the 8.4” non Nav. All the knobs stopped working. I reverted all the settings back for the 12.1” knobs work but screen won’t power up. I’m beyond frustrated.

Would you be willing to take a screen shot of the two settings and upload them here for me? I don’t get what I did wrong. I used the bypass JScan said to used. I also used the OBD tool they recommended. I made all the changes with the truck on run engine off. I plugged up the bypass and...

I triple checked it over the course of a few hours when I did the install.

Has anyone used OBD JScan to do the changes to the BCM?

Well at least I know it’s not that. There was a guy earlier on in this thread around page 36 that tried reprogramming his BCM with the android version of alpha OBD. He had the same issue I’m having. Once he switched to the windows version and reprogrammed the BCM it all worked as should. I...

My truck is a 19. It can’t be for the 8.4” because when I pull the fuse the screen isn’t messed up. Everything appears on the screen as it should. If it were the 8.4” Nav module my understanding is the display doesn’t show up right on the screen or it won’t show up all.

68317978AL

Ok guys I’m worried about this. I searched 68317978ai for the module. The only thing that comes up is AL. My module is new and the part number ends with AL not the ai like earlier in the thread. Could that be the problem??? I hope not because ai isn’t available and is superseded by the AL part...

Ok guys I need some help. I installed the the 12” screen with all necessary changes and cables and did the changes in the BCM and pulled the fuse for the radio. When I came back after an hour the radio wouldn’t power on. I got sound and the volume knob works and the tune knob does as well. I...

Some things I’ve learned through reading this WHOLE thread lol. The 21 and up module will not work on the older DT rams. The 8.4” module won’t work with the 12.1. I have read the 8.4 module can be reprogrammed to work with the 12 somewhere else but I’m not sure about that. I was also under...

Jimmy you are the man!