5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. D

    Blue Ox Sway Pro Hitch

    Yes I do lift with the tongue jack to get the bars set and to take them off. I am actually heading out soon so I will grab a pic and also see how level the truck is with a loaded trailer. Next time I go by the CAT scale I will get a truck on measurement to see how close my loaded steer axle...
  2. D

    Blue Ox Sway Pro Hitch

    Thanks for the insights. I set the ball height about 1.75" higher that the hitch coupler height. I think that those special RAM instructions are to account for the extra squat we get with the coil springs. The setup rides very well with the no sway and the trailer is perfectly level. I will put...
  3. D

    Blue Ox Sway Pro Hitch

    Is the goal to get the steer and drive axle weights equal or simply to return the weight on the steer axle to what it was before the trailer was connected?
  4. D

    Blue Ox Sway Pro Hitch

    Just weighted my ready to camp setup and I have 320 lbs more on my truck drive axle than my steer axle (CAT scale slip below). I am on the 10th link on my Blue Ox Sway Pro Hitch. Figured going to 11 links would get me close to balanced. However I am not able to get the 11th link to reach the...
  5. D

    Towed Tracer 31BDH with 1500

    Good share. Did you have the brake controller at heavy electric with that gain?
  6. D

    4WD auto?

    The option title to get the 4 Auto is "Electronic Shift-On-Demand Transfer-Case"
  7. D

    Aligning the exhaust tips

    Yup, this. Very easy
  8. D

    Aligning the exhaust tips

    I moved mine up about half way closer to the plastic than yours are. No issues
  9. D

    blend mount question....

    I think the thread below has it. Once you pull the plastic cover, there are 2 connectors you can tap into for switched 12V power (don't use constant 12V or the radar detector won't turn off with the truck). I tested with a volt meter first. If you order the mirror tap brand kit, use the smallest...
  10. D

    Easy and Cheap 20" Light Bar DIY Install (no fabrication needed)

    https://www.jeepgladiatorforum.com/forum/threads/using-homelink-buttons-to-power-lights.23091/
  11. D

    Hellwig Sway Bar on a Rebel

    I got my from amazon - right now 282 is the best you are gonna do. You may find a few sites with it cheaper but the shipping will make it more...
  12. D

    blend mount question....

    https://blendmount.com/ They are custom for the radar detector you have. Then I used the mirror tap system for power. A little pricy but its very clean
  13. D

    What did you do to your Ram today???

    That is very cool. Great job.
  14. D

    blend mount question....

    Yup. Here ya go
  15. D

    It's on the warm side here in Portland

    I have never seen such temps are the pacific NW got on sunday/monday. Across the border in BC, the recorded 118. Shattered the all time high temp for all of Canada. Crazy
  16. D

    Floor Jack recommendations

    I use this one https://www.amazon.com/gp/product/B0054WGRBA/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
  17. D

    Jacking point

    Old thread, I know. I would like to place the entire truck on 4 jack stands like in post 7. I plan to lift the rear from the factory lifting tab on each side and place a jack stand under the axle on each side of the differential. For the front, I plant to lift from the middle of the lower...
  18. D

    Where are we from in the North East

    Rochester, NY
  19. D

    NEW RADIO / CLIMATE KNOBS

    I got the email that my order shipped today....
  20. D

    NEW RADIO / CLIMATE KNOBS

    I ordered yesterday and did not see that. Maybe I got the last ones
Back
Top