Search results

The part number for the interior mirror with the camera for smart beam is MOP-68312206AA MIRROR, INSIDE REAR VIEW, 2019-2020 (Mfr. #: 68312206AA). I purchased mine through Summit Racing Equipment. Initially when I put mine in and used the five AlfaOBD commands that are posted online to activate...

Thanks for looking but the layout doesn't look like the fuse box like the in cab one behind the kick panel under the driver's side. This is a picture someone else posted that shows the location of the fuse.

I replaced the mirror that came with the truck with the oem mirror with the camera.

The Rain Sense Wipers option shows up in the uConnect settings and when I turn it on with the stalk the wipers do one swipe but nothing else. I drove it when it was raining but no response. If I turn the option off in uConnect then it goes back to being intermittent. My truck did come with the...

Now that I have had time to work with it I have the Smart Beams working and kind of have the Rain Sense Wipers working on my Ram 1500. Initially when using all 5 steps to setup the Smart Beams it resulted in my tailgate not unlocking. I went through step by step and found the problem was the...

I used the Hellwig bolts with no washers because with washers I had the same issue. I didn't want to cut the washers off the original bolts. I might still call Hellwig about this.

The red lines show the gap from the washer to the bracket and the blue line is where washer hits the bracket. At this point I don't want to keep cranking on the bolt and possibly strip threads. As I said before the other bolt I had no problem with going flush to the bracket. This occurring on...

I just received my Hellwig sway bar today. As I was installing it I noticed that on each of the mount brackets using the original bolts that one would go flush but the other one is getting caught on the bracket because of the washer and not going flush to the bracket. Has anyone else had this...

I am trying to set up the Smart Beam function on a 2019 RAM 1500 Bighorn using AlfaOBD using the five changes listed that should do it. What is happening though is it locks the tailgate and the only way I can get the tailgate to unlock is by reverting the settings. Any suggestions from anyone...

I would but I believe I read in the manual that the truck needs to be in motion for the sensor to work. According to the manual: When the ignition is first turned ON, the Rain Sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 0 mph (0 km/h), or the...

I just checked and the setting does appear in the uConnect. Now I just need to wait for it to rain to test it.

How long did it take for the option to show up in the uConnect settings?

I have a question. When you do a change in AlfaOBD that has multiple changes like adding a brake controller do you only change one option at a time and exit everything and then go back in or can you do all the changes at once then exit everything?

Just ordered the rear wheelhouse liners and screws from MoparPartsGiant.com. With shipping and tax my total came out to $117.49. The shipping was only $16.28. That sure beats paying $112 shipping from RockAuto.com.