Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I used this one:
https://www.amazon.com/dp/B0C8B6VKGW?ref=ppx_yo2ov_dt_b_fed_asin_title
Worked fine. Couldn't tall any difference between it and the OEM that I took off.
True, but if clutch debris is all that's keeping your trans going you are on borrowed time.
Don't flush, just drain an fill.
Just DIYed mine a just over 50k miles.
I'm more familiar with LS engines than the HEMI. But for the LS the rule of thumb is 10psi of oil pressure per 1,000 RPM. In that context 22psi is plenty at idle.
I put long tube header on mine without raising the motor up. PITA some of the header bolts are nearly impossible to get a wrench on...
Manifolds should be way easier.
Placement of the aftermarket Kooks Y pipe prevented me from removing the drain plug. So I replaced the whole pan with a Dorman. Was getting dark and the fluid was too hot to do the final fluid level check, so I will do that tonight when I get home from work.
I could not tell a difference...
I'm at 50k and plan to do the fluid service. Got quoted $495 for OEM pan/filter from dealer parts. Since Ram don't recommend a service interval, I'm going to just drain and fill only. Keep the original pan/filter. Yes there are cheaper knock off pans/filters but I've read there are issues...
Factory computers must be unlocked before any tuning can be done. Once that's done there is no going back they know even if you don't do any flashes.
I tuned my 2020 Ram with HP Tuners myself.
"Hemi Tick" is like saying someone has COPD. It's a general term for a host of disorders...
87% chance it's cracked exhaust manifolds i.e. exhaust leak.
Gah, there are umpteen different part numbers for O2 sensors on my 2020 Ram. Even seems to be a different # for left vs right up stream.
Does anyone know if there is any real difference? They all look exactly the same and have the same connectors.
Yes, your high flow cats are causing that code. You will need a custom tune to stop it.
Unfortunately for some inexplicable reason our ECU's also use the down stream O2's for fuel trims. This means the adding an O2 spacer trick might not work properly.
Yes, I just sent a set of those back to Summit. They were awful. After removing them I found the drivers side flange warped. Probably why I couldn't stop the exhaust leak...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.