Search results

This thread about dash lights, but what about door lights? Anybody added it with cheap aftermarket LED’s?

I tested the airdam manually, just powers it by 12v and change polarity I could open or close it, so I think there is no any digital signal there. And negative wire is not fixed on airdam, it reversing. Maybe airdam sending any error to BCM and it’s the reason the shutter not working, not a...

Thanks for this post. Could you please share here an wiring diagram of this parts? I know that the airdam is connected with a two-wire cable and is controlled by a 12v polarity reversal signal, I can’t understand how it can affect the operation of the shutter.

Any news about this mod? How make it works?

I paid customs tax the same amount as for truck itself, so it will drive in Russia forever 😉

Their sensors mounted behind the bumper, which is metal on Ram, not plastic. Sensors will not work.

Great info, I missed that, thanks!

Then let us know the part number of contacts, if you find, it will be most right way to make the harness!

I’m not sure you could insert factory contacts without completely disassembling the connector, they are shorter then i made, but maybe provide better contact. But if you make contacts by yourself, with enough lenght, you can just insert it from the cabin without even uninstall the connector...

Also i ordered cheapest LED indicator from China for about $1, and will install it’s in plastic door trim or mirror housing later.

Thank you, guys for this thread, i just finished this mod and it works well! Now I'll tell you how I made the missing wire from the XY400 connector, did not want to drill the bottom and just made the missed pins myself from a suitable wire and inserted them into the necessary slots. To do this...

I also wanted to install headlights from limited, but refused and put oem from Larami, because With Limited lights you will need a Longhorn or Limited grill, grill extensions, fascias and fascia paint. Also the fascias have holes in them for fender flares. So you will need to add flares, or...

is it so hard to do?

Rapid wear due to too powerful motor😀. In fact, it is soft rubber that holds grip on ice better and makes less noise, but apparently wears out faster.

I see on the Hellwig site that the rear sway bar is the same for the 4th and 5th gen Ram. Is it really so? The part number is 7709?

Since I live in Russia, where it is winter for half a year, I can say that the best winter tires that I have ever tried are Nokian Hakkapeliitta, they ride great on snow and ice. At the same time, they are not as noisy as, for example, a Cooper, and have much better grip than, for example...

Thanks a lot! I don’t care about mileage/hours, so I don’t need programming.

I read the whole thread and still did not understand, is swap to premium Cluster plug-and-play, except mileage/hours programminr, ot not?

Thank you, but I live in Russia and international shipping will cost me too much.

Has anyone thought about how to make the missing pins of the XY400 connector on their own? As I understand from the side of the cabin are male contacts, what if you just insert little thin steel plates in their place and connect the wires? Just not disassembling the connector. I also want to...