Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
That would be my second step after making sure the terminals and ground connections were clean.
What is the voltage under load when attempting to start?
Ambient air sensor should not be involved in the fan control, only the ECT sensor and perhaps the IAT sensor, the description is somewhat vague.
As far a resistance, the only thing mentioned is
"The sensor is used to sense engine coolant temperature. The sensor protrudes into the thermostat...
Might have to re-program vehicle config?
Not sure if these help, wondering why one schematic has the 3 pin connector.
Apologies for the lack of resolution, they get compressed a lot when uploaded.
I have only done the passenger side, had a broken stud, it was a minor pain.
Penetrating oil and a wire brush was helpful with the down-pipe hardware, they were pretty rusty.
You do not want to replace the front to back wire harnesses.
I would do a visual for any damage or loose connectors.
If the harness turns out to be bad then I would just order a long enough cable with correct color code Fakra connectors from amazon and run that.
edit: you could also have a...
If you have the actual "Hemi tick" then none of those parts will help, at the least a cam and lifters or possibly new engine.
If you have the cracked exhaust manifold tick that fades away when the engine heats up, then you need a manifold or manifolds.
Want to run 93 octane, just put it into the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.