Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
You are correct. I thought this post was talking about fronts, not rears. I posted earlier, maybe on another thread, which console harness I bought to get connectors for the rear heat/cool switches. BTW, I'm still trying to find the body (or cabin) harnesses to connect the 10 and 16 pin rear...
Nice. What is vta light? Also, I don't understand your comment about the switch. When you turn on fog lights, does that turn on fronts and rears simultaneously? Thanks, Brent
You don't need a new harness for the center stack. Everything in the center stack works through CANBUS (or whatever it's called now). So swapping the center stack was the easiest part of install for me.
I have this center stack for heated (no vented) seats and steering wheel. 8" Ram Center Stack Climate Control | Part no. 68340286AC and 68340286AD | eBay
You don't need a new harness. Everything in the center stack works through CANBUS (or whatever it's called now). So swapping the center stack was the easiest part of install for me.
I;ve posted several wiring diagrams (that I made) and pictures. I think that information is in this thread--but maybe a different thread. If you can't find my posts, let me know a I can reply.
Thanks. I've posted about this since my original question. I've installed the angled strikers. Just had to cut a slit for them in the rear wall "carpet". Also discovered that the reclining seat had a different bolt pattern from the non reclining. However, the holes and weld, or caged, nuts...
It must be on another thread; but I've been cooresponding with another member about getting this harnesses built. He's asked Jimmy several time and he said no response. I found a company online who builds harnesses. We communicated about what I needed; but they stopped communicating. Let me...
I've posted a lot about this. My truck, 2022 BH with Level 1 Equipment Group was missing MANY wires to make the heated/vented, power pass. seats and heated steering wheel work. I had the dismantler pull the complete IP and Cabin harnesses from the donor truck. I would never have been...
Yes, I added it, to the of the right of the USB jacks. I THINK I tapped into the wire that powers the 12V outlet at the top of the IP. I MAY have run a new wire from the Power Distribution Center. I didn't document it, and I can't remember. I can look tomorrow to see how I ran it. I also...
I did receive and wire the clockspring. Heated/vented seats and heated steering wheel work. I did not need to flash anything. After I installed all the wires the hard buttons for heat/vent worked. I don't have soft buttons (without flashing); but I think I can live the rest of my life with...
The donor seat I bought has heater pads. I have bought the vent bags and blower motors--but I don't know how to install the bags. (I posted pictures earlier). I think the bags install between the "hard" foam and the about 1/2" thick open cell foam. Do you know if I can peel the open cell...
I have not gotten that far. My truck does not have the harnesses that go to the gray (10) and black (16) connectors . So far, I haven't found anyone who can build these harnesses. I've not even found wiring diagrams for them. I have pinouts; but don't where the wires route and connect to...
I have these 2 harnesses available for Rear Heated (no Vent) Seats. 2019-up Ram Mopar 68311400AE Wiring-Rear Seat for Heated Rear Seat | eBay 2019-up Ram Wiring-Rear Seat for Heated Rear Seat Mopar 68294531AE | eBay
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.