Search results

My problem is that there are no existing wires in my truck for rear heat/vent. If the junkyard would have given me the front portion of the harnesses, with the connectors intact (that plug in around the IP) I would have known what to do. I called back and requested a quote for the front part...

This week, I bought a heated/vented/reclining rear seat. I already have one that's heated/reclining. I bought most of the parts to add vent to it. I was stumped on how to install the vent bags. After seeing the one I just bought, I see that the vent bags attach at the bottom/back of the...

Thanks for the instructions. Don't think I would have ever figured out where to mount it, without these. I 'robbed' the wires and connectors for this option from a donor harness. Tried to install the inverter module today. I removed the radio. I installed 3 speed nuts in the "frame" for...

Yeah, they were really sneaky by "giving away" half that B+ wire and deleting the other half! I contacted Jimmy07 this week. He said he could "probably" build the 2 harnesses for the rear seat. (I bought 4 sets of the 2 connectors {16 pin and 10 pin] and told him I can supply the...

More info: I'm trying to add both Rear Fog Lamps and Remote Proximity Keyless Entry (Passive Entry) to my truck. Only 2 PNs had both these oprions. 68360451AD is the cheaper one because it has [Parksense Ft/Rr Park Assist w/Stop]. [REAR FOG LAMPS], [Remote Proximity Keyless Entry]. 68358060AD...

FRONT: I was able to get the front heated/vented, the power passenger, and the heated steering wheel working by transplanting about 30 wires from the donor harness to my truck. While I didn't install the Memory switch in the door, I did have to run about 6 (of the 30) wires to the seat module...

See my earlier post. The large red wire (I don't remember the pin number; but think it's one of the corners) was present in my yellow connector under the passenger seat. So, I assumed there was B+ to it. But, for some reason, Fiat deleted an intermediate wire. Follow the seat harness from...

That feature is not very convenient. You have to "hunt" for the release cables.

I had to order the angled strikers and bolts (one bolt per striker). See my post above.

I swapped the reclining seats into my 2022 BH.. They don't recline as much as an airplane seat. More of a gimmick. Nice to brag that I have them; but not much benefit.

Thanks. I don't know what the FS section is. Is it a tab on this site?

Just to clarify, the red wire (top right in your pic) was present in my truck. There was an intermediate wire that was missing in my truck. That's why I said they were sneaky. While this wire was present, there was no power to it. The mating wire at the next connector was missing. Hard to...

Has anyone been able to make this work on 22 and up? I have all the parts to add venting; but I do not have the wire harnesses. Before I pursue harnessess, I want to make sure it's possible to add this option through computers.

I was wrong. I though you were asking about front; not rear.

How do they mount? I can lay my guitar, in case, barely, under the seat. The body part protrudes over the RamBox (meant RamBin). No way it would fit in any of the trays. I'd like to have underseat storage; but would like to be able to slide it out easily when I need to transport my guitar.

Just drove 8 hours in my 22 BH and noticed that I was constantly correcting the steering. Remined me of old cars that had a worn out steering box and you had to constantly turn the wheel left and right to take up the play. Not that bad, but definitely noticible. I have not noticed this before...

Did you have to buy a minimum quantity of the connectors? If so, do you have any to sell; and do you also have the pins?

Has anyone added to vent bags to their seat?

Were you able to get the rears heated and vented?

Thank you!