Search results

here--- https://5thgenrams.com/community/threads/lack-of-12v-outlets-and-needing-bed-cover.26978/#post-377739 -=FM45=-

Manny-- rear valance

@G07... those 'switches' shown are controlled by the CAN of the truck... the BCM does all the heavy stuff not the switch bank... they act like the keyboard of your computer - a pulse is sent to the BCM and then the command is processed ... -=FM45=-

All the info provided was for the 1500 DT -- give me a little to dig up info on the 2500 -=FM45=-

Great news--- glad all is well--- now onto the next mod ;) -=FM45=-

here-- https://5thgenrams.com/community/threads/colored-ambient-lighting-dash-and-doors.14274/page-5 -=FM45=-

Vin56--- just another thought... under Alfa, what is the 'Park Assist Tuning Set' value... that may need a change.. off hand it might need to be ' 10 Channel/BUX Rear Only/Summit' -- but don't hold me to it -- I think you're close... edit-- just did some more digging... before you change above...

... I should have said the sensors have the rubber rings from the factory... I have used this product on a half dozen Rams that I have added the front and rear sensors on.. again perfect match and no ill effects on their operation... -=FM45=-

@vin56-- just a heads up.. the sensors may come primed and ready to paint, just use some black TRIM paint--light coats for a perfect match, also the rubber Decoupler Rings come with the sensors; at least for the ones I recently ordered... -=FM45=-

Nice-- you will only need the harness, 2 sensors and the 2 rear valance pieces and you should be good to go... -=FM45=-

Def think that's the error issue... you also may have to add two pinned wires from the wiring block under your drivers seat to the module in the kick... you can check if you need them by looking at the grey plug at the module and see if all cavities are full... 68360453AD --- this is the rear...

@vin56--- How many sensors do you have in the rear - 4 or 6... with the new module and the new setting change - the BCM maybe looking for the two extra rear sensors -- just a thought -=FM45=-

Another option -- used them a half dozen times... https://www.mycartrim.com/ -=FM45=-

More Complete info--- MOD 100% tested and working https://5thgenrams.com/community/threads/adding-front-and-rear-parking-sensors.23200/ -=FM45=-

Quick how-to.... Enjoy :) -=FM45=-

As promised -- The Write-up .... Be gentle :) Hope nothing is missed-- -=FM45=-

--- that is a two piece plug.. slide the two sides apart and see what side is missing--you'll either need the male or female ends... re-pin your wires and you should be up and running -=FM45=-

Rick-- Posted is the yellow plug being refereed to... this is the one from pass seat - drivers has the same ... XY410 and XY420 - locate them and check what wires are present or not ... as far as the leds you have in had, check the part numbers against the numbers that are posted - the posted...

@ Nick-- Yes -- done it to my Bighorn... doing all 4 doors in the near future... I will get a write up together... it's going to be a little... i got 3 write-ups ahead of this one ... This write-up from Paragoptics will show the placement of the dash leds---...

Now I'm at a loss--- you already have everything in place --- did you add them or were they already in place from factory.. If they are already there they should work as is... yellow is interior, wht/grn is ambient, and black is ground... Are the yellow plugs populated with the corresponding...